Home
Главная
Vitek
Машинки Для Стрижки
VT-1364
Руководство по эксплуатации Страница: 9

Vitek VT-1364 Руководство по эксплуатации онлайн [9/24] 147582

ENGLISH

UTILIZING THE TOOLKIT BEFORE

THE FIRST USE

After unit transportation or storage under

cold (winter) conditions, it is necessary to

keep it for at least three hours at room tem-

perature before switching on.

Battery charging

A fully charged battery provides 4 hours of con-

tinuous unit operation.

– Insert the USB cord Type C (16) connec-

tor into the socket (10). Connect the second

end of the USB cord (16) to the power sup-

ply unit (15).

– Connect the power supply unit (15) into the

mains socket, the indicator (8) will light up

red and the digital display (7) will show the

remaining battery charge in blue. From «10»

(the battery is discharged) to «99» (the bat-

tery is fully charged).

– Before the first usage of the unit, fully charge

the battery for 3 hours.

– Remove the protective sticker from the dis-

play (7).

– During charging the digital value will change

gradually. After charging is finished, the dis-

play will show the number «99» and glow

constantly until the power supply unit is dis-

connected from the mains.

– After charging remove the power adapter (15)

from the mains socket and disconnect the

adapter cord from the unit. The indicator (8)

and the digital display (7) will go out.

Notes:

– If the display shows the value «10», this means

that the remaining power («power left») is less

than 10 percent and the battery needs to be

charged.

– Charge the battery at the temperature from

+5° C to +35° C.

– Never leave the unit connected to the mains

unattended.

– If you haven't used the unit for a long time

(more than 2 months), charge the battery

fully for 3 hours before using the unit.

Lubricating oil

– To maintain the unit in a good condition, you

should lubricate the blades (1) after every use

of the unit (pic. 3).

Attention! Use only the lubricating oil (18) from

the delivery set.

DO NOT USE vegetable oil, fat, oil mixed with

any solvents for lubricating.

Solvents will evaporate, leaving thick grease

that can slow down the motion of the adjust-

able blade.

Hair length adjustment

Adjust the cut hair length from 1.0 to 1.9 mm by

moving the adjustable blade with the adjuster

(2). The adjuster (2) has four positions: I, II, III,

IV. When you move the adjuster to the right, the

adjustable blade lifts up to 0.3 mm with each step:

reducing the gap (1.9; 1.6; 1.3; 1.0 mm), thereby

reducing the length of the cut hair from 1.9 to 1.0

mm. The position I has the biggest gap 1.9 mm.

– If you need to set the hair length from 4 to

13 mm, move the adjuster (2) to the posi-

tion IV (1.0 mm) and install the correspond-

ing attachment.

– The hair clipper supplied with 4 types of hair

cutting attachments: 3 mm (11), 6 mm (12), 9

mm (13) and 12 mm (14). The values indicated

on the attachments correspond to the remain-

ing hair length after cutting.

– To install the attachment (11-14), insert the

trimmer blades (1,) into the selected attach-

ment (11-14), lower the attachment until the

lock engages, you will hear a click when the

attachment lock enters the groove (20) (pic. 1).

– To remove the attachment (11-14), press the

lower part of the attachment upwards on the

side of the lock with your thumb and carefully

remove the attachment from the body.

Using the unit

– For cordless use of the unit, charge the bat-

tery fully.

– Before cutting hair, switch the unit on

with the button (6) " " and make sure that

the unit is operating normally and the blades

are moving smoothly. If there is excess oil

on the blades, remove it with a dry lintless

cloth.

– Switch the unit off by pressing the button (6)

" ".

– Set the hair length from 1.0 to 1.9 mm with

the shifter (2) or use the attachment (11-14).

– Switch the unit on by pressing the button (6)

" ".

– After finishing the unit operation switch it off

by pressing the button (6) " " a second time.

Notes:

– Always switch the unit off during the intervals

in operation.

– Switch the unit off before changing the

attachment.

Vitek VT-1364 Руководство по эксплуатации онлайн [9/24] 147582

Похожие устройства