Hansa OSC6211IH [93/0] Installation

Hansa OSC 5111 BH (WH) [93/96] Installation
93
INSTALLATION
Elements
kitchen hood consists of the following elements
(Fig.2...):
Installation
Step-by-stepapplianceinstallationisshownonFig.
3...
Setting the air extractor mode of operation of
the hood
Intheextractormodeairisdischargedtotheout-
sidebyaspecialconduit.Inthatsettinganycarbon
ltersshallberemoved.Thehoodshouldbecon-
nectedtotheopeningdischargingairtotheoutside
bymeansofarigidorexibleconduitof
120mmdiameter,whichshouldbepurchasedina
shopsellinginstallationmaterials.
Aqualiedinstallershouldbecommissionedto
maketheconnection.
Setting the odour absorber mode of operation
of the hood
Inthisoptionlteredairreturnstotheroom
throughopeningsinthefrontofthehood.
In this setting it is necessary to install the carbon
lter. It is recommended to install the air guide
(availabilitydependingonmodel).
In some universal hoods you need to switch lever
insidethehood(Fig.8)toswitchbetweenthe
extractionandairrecirculationmodes.Thecle-
aned air is returned to the room through the holes
inthetopoftheunit.
Furnitureandtelescopiccookerhoodsoperating
in air recirculation mode require installation of the
exhaustduct.Theotherendoftheductshouldbe
directedtotheroomasitwilldischargelteredair.
Fan speeds
The lowest and medium speeds should be used
under normal conditions and with low concentration
offumes.Themaximumspeedshouldbeusedin
case of high concentration of kitchenfumes,e.g.
duringfryingorgrilling.
OPERATION AND MAINTENANCE
Usecontrolpaneltocontrolyourcookerhood(Fig.4)
1,2,3buttonscontrolcookerhoodfanspeedintherangefrom1to3,0meansOFF
-Lights“L”buttonswitchescookerhoodlightson/o󰀨independentlyoffanoperation.

Содержание

Похожие устройства

Скачать