KRAFT KF-FSK50603СEGBL Инструкция по эксплуатации онлайн [23/48] 903240

ELECTRIC STOVE

USER GUIDE

ELECTRICAL CONNECTION

ATTENTION! The appliance must be connected to the main electrical network

in accordance with applicable laws and regulations.

• Make sure that the power from the main network is sufficient for the power supply system

is grounded in accordance with current regulations, and the power cable does not come

into contact with the heated elements.

• Do not use adapters, extension cords, or «tees» to connect the appliance.

• If you need to replace the power cord, make sure that it meets current standards and

meets the product specifications.

GROUNDING

• T his appliance requires grounding to protect it from short circuits and electrical dissipation. It

is equipped with a grounded plug installed on the power cord. Therefore, the appliance must

be connected to an appropriate electrical outlet.

• The installation, connection and grounding of the electrical system must correspond to the

provisions of European standards, as well as applicable local regulations.

• The ground cable must not be interrupted by a switch. If your apartment does not have a

ground connection, contact a qualified electrician to install it.

ATTENTION! Before servicing the product, turn off the electrical power completely.

The manufacturer is not responsible for any direct or indirect damage caused by incorrect

installation or connection. Therefore, all installation and connection operations must be

performed by qualified personnel in accordance with applicable local and general regulations.

EXPLOITATION

1. After storing the appliance in a warehouse or transporting it at a temperature below 15 °C,

it must be kept at room temperature for at least 2 hours before switching it on.

2. Check the power supply characteristics, then connect the appliance to a power source.

3. Make sure that the air vents are not closed. Open the window for air circulation.

4. Set the power controls to the maximum level. Heat an empty stove for 30 – 45 minutes.

ATTENTION! When you connect the appliance for the rst time, you may see an

unpleasant smell of burning, this is considered the norm, because the outer surface of

the heating elements may contain factory insulation materials necessary for corrosion

protection. It will disappear after 30 minutes.

Wait for the appliance to cool completely. Then clean the outside and inside of the electric

stove with a slightly damp, soapy, soft cloth. Use soft materials to clean the surface. Wait until

completely dry before first use.

ATTENTION! During operation, the oven surface heats up and become hot! Be careful do

not touch the heating elements!

When cooking, use cookware with a diameter that matches each burner. Use only flat-