Home
Главная
Brayer
Вакууматор
BR5071
Инструкция по эксплуатации Страница: 11

Brayer BR5071 Инструкция по эксплуатации онлайн [11/64] 904076

• Open the top cover (1) by simultaneously pressing

the latches (10) (Fig. 1).

• Pull the lm to the required length (Fig. 4), it is

always recommended to use a lm longer than the

product for packing by 5-8 centimeters (Fig. 6).

• Before cutting the lm, make sure that the cutter (3)

is on the left or right side of the lm (Fig. 4).

• Hold the lm and run the cutter (3) across the lm

(Fig. 5).

VACUUM PACKING OF FOOD PRODUCTS

• Place the product in the prepared vacuum bag,

straighten the unsealed side of the bag and place

it in the vacuum channel (8) (Fig. 6), always make

sure that the seal area of the bag is clean, there are

no wrinkles on the bag and the removable tray (4)

is clean. Always clean the removable tray (4) after

using the vacuum sealer.

• If there is a lot of air in the vacuum bag, in this case

it is recommended to squeeze out excess air from

the bag, this will make the vacuum pump easier to

operate.

• Close the top cover (1) until the latches (10) click

(Fig. 7).

• Press the «Vacuum and packing» button (14), the

button indicator (14) will light up, after sealing the

bag, the indicator will go out.

• Always take breaks between vacuuming modes

and open the top cover (1), this is necessary for the

heating element (5) to cool completely.

Notes:

- during vacuuming, you will hear the noise of a running

pump, this is normal;

- when vacuum packing items with sharp edges, protect

the vacuum bag with soft shock-absorbing material

(for example, cloth), this will help prevent accidental

puncture of the vacuum bag;

- if you need to stop the product vacuuming process,

press the «Vacuum and packing» button (14) again.

• Open the top cover (1) by simultaneously pressing the

latches (10) (Fig. 1) and remove the vacuum bag with the

product. Place the bag with product in the refrigerator or

freezer (see IMPORTANT TIPS FOR USING A VACUUM

SEALER and the table with recommendations on shelf

life of products).

• When nished, unplug the power cord from the electrical

outlet.

USING A CONTAINER TO VACUUM FOOD

PRODUCTS

• Prepare a vacuum container (not included in the delivery

set) for storing food products and place the food products

in it.

• Close the container lid tightly.

• Insert one end of the vacuum hose (20) into the hole (12)

and turn to secure, insert the other end of the hose (20)

into the hole in the food container lid and turn to secure

(Fig. 8).

• Press the «Vacuum and packing» button (14), the

indicator of the button (14) will light up, after pumping out

the air from the container, the indicator will go out.

Brayer BR5071 Инструкция по эксплуатации онлайн [11/64] 904076

Похожие устройства