Home
Главная
Brayer
Блендер
BR1263
Инструкция по эксплуатации Страница: 12

Brayer BR1263 Инструкция по эксплуатации онлайн [12/48] 904077

• Place the reducer lid (9) onto the bowl (17) and turn it

clockwise until it stops.

• Press the locks (2) and install the motor unit in the

installation location (7), make sure that the motor unit

is securely xed. Install the motor unit vertically and

without distortion (Fig. 5).

• Insert the power plug into the mains socket.

• To switch on, press and hold down the «

» button (4).

• When pressing and holding the «

» button (4), you

can adjust the rotation speed of the disk (12) by

turning the knob (5).

• To operate in maximum speed mode, press and hold

the «TURBO» button (3).

• During operation, place food into the feeding chute (8)

and feed it using the pusher (6).

• Monitor the lling of the bowl (17), do not allow the

bowl (17) overowing.

• Release the button (3 or 4) to switch o󰀨.

After using the unit, wait until the knife (10) fully

stops.

• Remove the power plug from the mains socket.

• Disconnect the motor unit from the reducer lid (9) by

pressing the lock buttons (2) (Fig. 5).

• Remove the reducer lid (9) from the bowl (17) by

turning it counterclockwise.

• Remove the knife (10) from the shaft (16), remove the

attachment (11) from the container (17), remove the

shaft (16).

• Take the chopped products out of the bowl (17).

• Monitor the lling of the bowl (17), do not allow the

bowl (17) overowing.

• Release the button (3 or 4) to switch o󰀨.

After using the unit, wait until the disc (13) fully

stops.

• Remove the power plug from the mains socket.

• Disconnect the motor unit from the reducer lid (9) by

pressing the lock buttons (2) (Fig. 4).

• Remove the reducer lid (9) from the bowl (17) by

turning it counterclockwise.

• Remove the disc (12) from the container (17) holding

the upper part of the shaft (16).

• Take the chopped products out of the bowl (17).

DICING

• The time of continuous operation for dicing should not

exceed 30 seconds. Take a break of at least 3 minutes

between two operation cycles.

• Before assembling make sure that the power plug is

not inserted into the mains socket.

• It is prohibited to dice hard vegetables, hard cheeses,

various hard delicacies, for example, smoked or dry-

cured sausage or similar meat products.

• Place the bowl (17) on a at and stable surface.

• Install the shaft (16) on the axis in the center of the

bowl (17).

• Align the tabs in the bowl (17) with the slots on the

cubic attachment (11) and place the attachment (11)

inside the bowl (17).

• Place the dicing knife (10) on the shaft (16).

Brayer BR1263 Инструкция по эксплуатации онлайн [12/48] 904077

Похожие устройства