Home
Главная
Brayer
Блендер
BR1263
Инструкция по эксплуатации Страница: 11

Brayer BR1263 Инструкция по эксплуатации онлайн [11/48] 904077

• To operate in maximum speed mode, press and hold

the «TURBO» button (3).

• During operation, place food into the feeding chute

(8) and feed it using the pusher (6).

• Monitor the lling of the bowl (17), do not allow the

bowl (17) overowing.

• Release the button (3 or 4) to switch o󰀨.

• After using the unit, wait till the disc (12) fully stops.

• Remove the power plug from the mains socket.

• Disconnect the motor unit from the reducer lid (9) by

pressing the lock buttons (2) (Fig. 2).

• Remove the reducer lid (9) from the bowl (17) by

turning it counterclockwise.

• Remove the disc (12) from the bowl (17), holding the

top of the shaft (16).

• Take the chopped products out of the bowl (17).

CHOPPING

The time of continuous operation with the disc for

chopping (13) should not exceed 30 seconds. Take

a break of at least 3 minutes between two operation

cycles.

Before assembling make sure that the power plug is

not inserted into the mains socket.

- Wash and prepare fruit or vegetables before

chopping. Cut the fruit so that it ts freely into the

feeding chute (8), remove the core or seeds.

- Peel the vegetables from hard skins.

Caution! When operating the unit, use only the

pusher (6) supplied with the unit; do not use any

other objects. Never push the food with your hands!

• Place the bowl (17) on a at and stable surface.

• Install the shaft (16) on the axis in the center of the

bowl (17).

Notes:

- the disc for chopping (13) is double-sided; before

installing the disc (13), decide which side of the

disc (13) you need;

- use the side of the disc (13) with a ne chopper for

chopping hard cheeses, rst cut the cheese into

cubes of 25x25x25 mm.

• Install the disc for chopping (13) onto the shaft (16).

• Place the reducer lid (9) onto the bowl (17) and turn it

clockwise until it stops.

• Press the locks (2) and install the motor unit in the

installation location (7), make sure that the motor unit

is securely xed. Install the motor unit vertically and

without distortion (Fig. 4).

• Insert the power plug into the mains socket.

• To switch on, press and hold down the «

» button

(4).

• When pressing and holding the «

» button (4), you

can adjust the rotation speed of the disk (12) by

turning the knob (5).

• To operate in maximum speed mode, press and hold

the «TURBO» button (3).

• During operation, place food into the feeding chute

(8) and feed it using the pusher (6).

Brayer BR1263 Инструкция по эксплуатации онлайн [11/48] 904077

Похожие устройства