Home
Главная
Brayer
Блендер
BR1263
Инструкция по эксплуатации Страница: 10

Brayer BR1263 Инструкция по эксплуатации онлайн [10/48] 904077

• Insert the power plug into the mains socket.

• To switch on, press and hold down the «

» button

(4).

• When pressing and holding the «

» button (4), you

can adjust the rotation speed of the chopper knives

(14, 15) by turning the knob (5).

• To operate in maximum speed mode, press and hold

the «TURBO» button (3).

• During operation, hold the motor unit with one hand

and hold the bowl (17) by the handle (18) with the

other hand.

• If necessary, during operation, you can add the

necessary ingredients through the feeding chute (8).

• Release the button (3 or 4) to switch o󰀨.

• After using the unit, wait until the chopper knife (14,

15) fully stops.

• Remove the power plug from the mains socket.

• Disconnect the motor unit from the reducer lid (9) by

pressing the lock buttons (2) (Fig. 2).

• Remove the reducer lid (9) from the bowl (17) by

turning it counterclockwise.

• Using caution, remove the chopper knives (14, 15)

from the bowl (17) holding the top of the shaft (16).

• Take the chopped food out from the bowl (17).

SLICING

The time of continuous operation with the

attachment for slicing (12) should not exceed 30

seconds. Take a break of at least 3 minutes between

two operation cycles.

Before assembling make sure that the power plug is

not inserted into the mains socket.

- Before slicing, wash and prepare fruit or

vegetables. Cut the fruit so that it ts freely into the

feeding chute (8), remove the core or seeds.

- When cutting sweet peppers, remove the seeds

and peel the vegetables if necessary.

Caution! When operating the unit, use only the

pusher (6) supplied with the unit; do not use any

other objects. Never push the food with your hands!

• Place the bowl (17) on a at and stable surface.

• Install the shaft (16) on the axis in the center of the

bowl (17).

Note: the disk for slicing (12) is double-sided; before

installing the disk (12), decide what thickness of slicing

you need.

• Install the disk for slicing (12) on the shaft (16).

• Place the reducer lid (9) onto the bowl (17) and turn it

clockwise until it stops.

• Press the locks (2) and install the motor unit in the

installation location (7), make sure that the motor unit

is securely xed. Install the motor unit vertically and

without distortions (Fig. 3).