Home
Главная
Brayer
Блендер
BR1263
Инструкция по эксплуатации Страница: 9

Brayer BR1263 Инструкция по эксплуатации онлайн [9/48] 904077

• For operation at the maximal rotation speed, press

and hold down the button (3) «TURBO».

Notes:

- products should be put into the bowl before the

unit is switched on. The amount of products to be

processed should not exceed 2/3 of the capacity

of the bowl in which they are processed.

- before chopping and mixing peel the fruit, remove

inedible parts, such as stones, and cut fruit into

15x15x15 mm cubes. Put them into a bowl and

add some juice or water. The maximal amount of

products should not exceed 350 g and 250 ml of

water or juice.

- do not chop or mix frozen food.

ATTENTION! When chopping hard vegetables, for

example, car rots — cut the carrot into small 15x15x15

mm pieces and put them in the cup (22). The maximal

weight of the carrot should not exceed 150g. Add 250

ml of water.

• To switch the blender attachment (1) rotation o󰀨

release the button (3 or 4).

• After you nish the unit operation, take the power

plug out of the mains socket and remove the blender

attachment (1) by pressing the release buttons (2)

(pic. 1).

ATTENTION!

- Do not remove the blender attachment (1) during

the unit operation.

- To avoid damaging the knives of the blender

attachment (1) do not process very hard products,

such as cereals, rice, co󰀨ee beans, hard cheese,

frozen food etc.

- If the foodstu󰀨s are hard to chop with the blender

attachment (1), add some water, juice, liquor etc.

CHOPPING

Before assembling the chopper, make sure that the

power plug is not inserted into the mains socket.

• Place the bowl (17) on a at and stable surface.

• If the chopper knives (14, 15) have a protective

cover, remove it carefully.

• Carefully install the large knife (15) on the shaft (16),

then install the small knife (14), hold the shaft (16) by

the top and place it on the axle in the center of the

bowl (17).

Caution: be careful, the blades of the chopper

knives (14, 15) are very sharp!

• Put the food into the chopper (17). Do not overll

the bowl (17); when chopping and mixing food, its

volume should not exceed 1,400 ml.

Note: do not turn on the device with an empty bowl

(17).

• Install the reducer lid (9) onto the bowl (17) and turn

it clockwise until it stops.

• Press the locks (2) and install the motor unit in the

installation location (7), make sure that the motor unit

is securely xed.

• Install the motor unit vertically and without distortion

(Fig. 2).

Brayer BR1263 Инструкция по эксплуатации онлайн [9/48] 904077

Похожие устройства