Home
Главная
Brayer
Термопот
BR6001
Инструкция по эксплуатации Страница: 10

Brayer BR6001 Инструкция по эксплуатации онлайн [10/42] 904102

ATTENTION! Be careful when pouring out water to

avoid burns by hot water.

• It is not recommended to consume the hot water

obtained from the initial boiling for food, you can use

it for household needs.

USING THE THERMOPOT

• • Place the thermo pot on a dry at surface keeping

at least 20 cm gap between the thermo pot body and

the wall or furniture and at least 50 cm of free space

above the thermo pot.

• Fill the thermopot with water using suitable

containers, but do not exceed the maximum water

level mark. Do not ll the thermopot with water

directly from the faucet; to ll the thermopot use a

suitable bowl.

• You can remove the water tank (6) and ll it with

water (Fig. 1), replace the tank (6) and close it with

the lid (5).

• Insert the power cord plug into the mains socket.

• Place a cup of the required volume onto the grid (2)

of the removable drip tray (1), make sure that the cup

is under the water drain spout (3).

• To unlock the thermo pot, press and hold down the

button (16) «

» for about 3-5 seconds.

• Press button (14) «

» to set the desired water

volume: 100 ml, 200 ml, 300 ml, 400 ml, or 000

(continuous water ow). The selected water volume

will be displayed via digital indication (18).

• Press button (15) «

» to set the desired water

temperature: 45, 55, 65, 75, 85, 100°C, or 000 (room

temperature). The set water temperature will be

displayed via digital indication (19).

• Press the button (13) «

» to start dispensing water.

Water will start owing continuously from the spout

(3) after 5-10 seconds. Press the button (13) «

again to stop the water ow.

Note: in the water supply mode for preparing baby food,

water is supplied by pressing and holding the button

(17) «

», when you pour the required amount of water,

release the button (17) «

».

WARNING! To avoid the risk of burns, always check

the temperature of baby food before giving it to

your baby. You can easily check the temperature

of baby food by placing a few drops on the back of

your hand.

ATTENTION! Be careful when pouring water into the

cup to avoid burns by hot water.

• When there is no water in the reservoir (6), you

will hear a sound signal, error code E7 will ash,

and a ashing «

» indicator (11) will appear. Rell

the reservoir (6) with water and continue using the

thermo pot.

instr BR6001.indd 10instr BR6001.indd 10 15.07.2024 10:38:5515.07.2024 10:38:55

Brayer BR6001 Инструкция по эксплуатации онлайн [10/42] 904102

Похожие устройства