Home
Главная
Brayer
Термопот
BR6001
Инструкция по эксплуатации Страница: 9

Brayer BR6001 Инструкция по эксплуатации онлайн [9/42] 904102

45, 55, 65, 75, 85, 100°C, or 000 (room temperature).

The set water temperature will be displayed via

digital indication (19).

• «17» Water supply button for preparing baby formula

», put the baby formula into a bottle or cup, press

and hold the button (17) «

», the temperature 40°C

will be displayed in digital symbols (19), hold the

button (17) «

» until you have poured the required

amount of water, then release the «

» button (17).

ATTENTION! In the water supply mode for preparing

baby food, at all temperature settings, the water does

not boil in advance, therefore, when preparing baby

food, it is recommended to rst boil and then cool the

water to room temperature, pour it into the tank (6) and

use it.

• «18» In digital symbols (18) the set water supply

volume is displayed.

• «19» In digital symbols (19) the set water supply

temperature is displayed.

THE FIRST USE

• Place the thermopot on a dry at surface keeping at

least 20 cm gap between the thermopot body and

the wall or furniture and at least 50 cm gap above the

thermopot.

• Remove the lid (5) (pic. 1).

• Fill the thermopot with water using suitable

containers but do not exceed the maximum water

level mark. Do not ll the thermopot with water

directly from the faucet; to ll the thermopot use a

suitable bowl.

• You can remove the water tank (6) and ll it with

water (Fig. 1), replace the tank (6) and close it with

the lid (5).

Notes: to reduce the mineral deposit (scale), we

recommend using the water cleaned with domestic

lters.

• Insert the power cord plug into the mains socket.

• Place a cup with a volume of at least 200 ml on the

grid (2) of the removable drip tray (1), make sure that

the cup is under the spout for pouring water (3).

• To unlock the thermo pot, press and hold down the

button (16) «

» for about 3-5 seconds.

• Press button (14) «

» to set the water volume: 200

ml - the set water volume will be displayed via digital

indication (18).

• Press the button (15) «

» to set the water

temperature: 100°C - the set water temperature will

be displayed via digital indication (19).

• To start dispensing water, press the button (13) «

». Water will start owing continuously from the spout

(3) after 5-10 seconds. To stop the water ow, press

the button (13) «

» again.

• After lling the cup with hot water for the rst time,

drain the water and ll and drain the hot water from

the cup one or two more times.

instr BR6001.indd 9instr BR6001.indd 9 15.07.2024 10:38:5515.07.2024 10:38:55

Brayer BR6001 Инструкция по эксплуатации онлайн [9/42] 904102

Похожие устройства