Home
Главная
Brayer
Термопот
BR6001
Инструкция по эксплуатации Страница: 8

Brayer BR6001 Инструкция по эксплуатации онлайн [8/42] 904102

• Unpack the thermopot and remove all the packaging

materials.

• Keep the original package.

• Read the safety measures and operating

recommendations.

• Check the delivery set.

• Examine the thermopot for damages, in case of

damage do not plug it into the mains.

• Make sure that the specications of power supply

voltage specied on the label correspond to the

specications of your mains. When using the

thermopot in the mains with 60 Hz frequency, the unit

does not need any additional measures.

• Wipe the outer surface of the unit body with a clean,

slightly damp cloth to remove dust.

• Remove the lid (5).

• Remove the water tank (6).

• Wipe the water tank (6) inner surface with a clean,

slightly damp cloth to remove dust. Close the lid (5).

CONTROL PANEL

Before using the thermopot, familiarize yourself

with the functions of the buttons on the control

panel (4).

• «10» Indicator of the need for descaling «Descaling»,

after using the thermopot for 10 hours, the indicator

(10) «

» will ash, this means that it is necessary

to clean o󰀨 mineral deposits (scale) (see section

Removing mineral deposits).

• «11» No water in reservoir indicator « », when there

is no water in the reservoir (6), you will hear a sound

signal, error code E7 will ash, and a ashing «

indicator (11) will appear. Rell the reservoir (6) with

water and continue using the thermo pot.

• «12» Descaling mode button « ». After using the

thermo pot for 10 hours, the «

» indicator (10) will

start ashing, indicating the need for descaling (see

the Descaling section).

• «14» Water volume selection button «

»: Press the

button (14) «

» to set the desired water volume:

100 ml, 200 ml, 300 ml, 400 ml, or 000 (continuous

water ow). The selected water volume will be

displayed via digital indication (18).

• «13» Power/water dispense button «

»: To

dispense water, press the button (13) «

». Water

will start owing continuously from the spout (3)

after 5-10 seconds. To stop the water ow, press the

button (13) «

» again.

• «16» Lock Button «

»: To unlock the thermo pot,

press and hold down the button (16) «

» for about

3-5 seconds. If no actions are taken within 10-15

seconds, the thermo pot will automatically lock. To

manually lock the thermo pot, press the lock button

(16) «

».

• «15» Temperature setting button «

»: Press the

button (15) «

» to set the desired water temperature:

instr BR6001.indd 8instr BR6001.indd 8 15.07.2024 10:38:5515.07.2024 10:38:55

Brayer BR6001 Инструкция по эксплуатации онлайн [8/42] 904102

Похожие устройства