Home
Главная
Brayer
Термопот
BR6001
Инструкция по эксплуатации Страница: 12

Brayer BR6001 Инструкция по эксплуатации онлайн [12/42] 904102

the service center for inspection or repair of the

thermopot.

CLEANING AND MAINTENANCE

• Unplug the thermopot before cleaning.

• Clean the outer surface of the thermopot body with a

slightly damp cloth and then wipe it dry.

• Use neutral detergents to remove dirt, do not use

metal brushes, abrasives and solvents.

• Do not immerse the thermopot and the power cord

into water or other liquids.

• Do not put the thermopot in a dishwashing machine.

Removing the mineral deposits (descaling)

• After using the thermopot for 10 hours, the «

indicator (10) will ash, reminding you to descale.

• Scale, appearing inside the thermopot heater,

inuences the water taste and disturbs the heat

exchange between water and the heating element. It

also risks damaging the heating element. Burning of

the heating element caused by the large amount of

scale is not covered by warranty.

• To remove the scale ll the water tank (6) with a

mixture of one part ordinary vinegar and two parts

water up to the maximum water level.

• Insert the power cord plug into the mains socket.

• Place a container under the water drain spout (3)

into which you can collect all the water from the tank

(6) (at least 3 liters). To make it easier to install the

container, you can remove the drip tray (1).

• Press and hold the button (12) «

» for 3 seconds,

the descaling function will turn on and the cleaning

solution will be supplied to the installed container.

Once all the cleaning solution has exited the tank (6),

cleaning of mineral deposits is completed and the «

» indicator (10) will stop ashing.

• When the removal of mineral scale is complete,

unplug the unit and wait for some time for the water

in the heating element of the thermopot to cool down.

• Remove the water tank (6).

• Lift the tray (1) and remove it.

• Position the thermo pot over a sink, for example,

and unscrew the drain plug (9) by turning it

counterclockwise.

• Wait for the remaining cleaning solution to drain out,

then reinstall the plug (9) and screw it in by turning it

clockwise until it is tight.

Note: if you notice water droplets under the thermo pot,

tighten the plug more securely.

• Install the thermopot and ll the water tank (6) with

clean water to remove any remaining cleaning

solution.

• Plug the power cord into an electrical outlet.

• Place a cup with a volume of at least 200 ml on the

grid (2) of the removable drip tray (1), make sure that

the cup is under the spout for pouring water (3).

• To unlock the thermo pot, press and hold down the

button (16) «

» for about 3-5 seconds.

instr BR6001.indd 12instr BR6001.indd 12 15.07.2024 10:38:5515.07.2024 10:38:55

Brayer BR6001 Инструкция по эксплуатации онлайн [12/42] 904102

Похожие устройства