Home
Главная
Brayer
Термопот
BR6001
Инструкция по эксплуатации Страница: 13

Brayer BR6001 Инструкция по эксплуатации онлайн [13/42] 904102

• Press button (14) « » to set the desired water

volume: 100 ml, 200 ml, 300 ml, 400 ml, or 000

(continuous water ow). The selected water volume

will be displayed via digital indication (18).

• Press the button (15) «

» to set the desired water

temperature: 45, 55, 65, 75, 85, 100°C, or 000 (room

temperature). The set water temperature will be

displayed via digital indication (19).

• Press the button (13) «

» to start dispensing water.

Water will start owing continuously from the spout

(3) after 5-10 seconds. Press the button (13) «

again to stop the water ow.

ERROR CODES

E7 The water tank has run out

of water

Fill the tank with water to the

maximum level.

E5 Temperature sensor

malfunction

Contact a service center to

check or replace the temperature

sensor.

E4 Temperature sensor

malfunction or water supply

malfunction

Contact a service center to

check or repair the thermopot.

E0 Control board malfunction Contact a service center to

check or repair the thermopot.

Water droplets under the

thermo pot

Tighten the drain plug more

securely.

• After the rst lling of the cup, drain the water and ll

the cup again.

• After removing scale from the thermopot, press

and hold the on/o󰀨/water supply button (4) «

for 5 seconds, the button (4) illumination will light

up green, the thermopot can be used in normal

operation mode.

• You can use a solution of citric acid (2 teaspoons

of acid per 1 liter of water) or special detergents for

electric kettles to remove scale, strictly following the

instructions for their usage.

• Clean the thermopot from scale regularly.

Removable tray

• Drain the water from the tray (1) regularly and clean

it.

• Lift the tray (1) and remove it, remove the grid (2),

drain the water from the tray (1).

• Wash the tray (1) and the grid (2) with water and

neutral detergent, dry it and set back to its place.

STORAGE

• Before taking the thermopot away for long storage,

disconnect it from the mains.

• Clean the thermopot.

• Drain any remaining water by unscrewing the drain

plug (9). After draining, reinstall the plug (9) and

screw it in securely.

• Keep the thermopot out of reach of children and

disabled persons.

instr BR6001.indd 13instr BR6001.indd 13 15.07.2024 10:38:5615.07.2024 10:38:56

Brayer BR6001 Инструкция по эксплуатации онлайн [13/42] 904102

Похожие устройства