Brayer BR3137 Инструкция по эксплуатации онлайн [7/32] 904119
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Brayer BR3137 Инструкция по эксплуатации онлайн [7/32] 904119

Brayer BR3137 Инструкция по эксплуатации онлайн [7/32] 904119
7
EN
CONCENTRATOR NOZZLE
• The nozzle (7) allows directing a narrow air ow of
high intensity at a denite hair lock.
• Insert the concentrator nozzle (7) into the body of the
hot hair styler and turn it clockwise as far as it will go.
Make sure that the installed nozzle is xed properly.
• Insert the power plug into the mains socket. Set the
desired operating mode with the switch (3).
• After nishing work, set the switch (3) to the «0»
position and unplug the power cord from the
electrical outlet.
• Remove the concentrator nozzle (7) by turning the
concentrator nozzle (7) counterclockwise and pulling
it out of the hot hair styler body.
OVERHEATING PROTECTION
• Overheating protection switches the unit o󰀨 if the
outgoing air is too hot.
• If the hot air styler is switched o󰀨 during operation,
set the switch (3) to the position «0», unplug the
unit and make sure that the air inlets and outlets are
unblocked.
• Let the unit cool down for 5-10 minutes and switch it
on again. Do not block the air inlets during the unit
operation and avoid getting of hair into the air inlets
(4).
CLEANING AND MAINTENANCE
• Set the switch (3) to position «0», unplug the power
cord from the electrical outlet, wait for the installed
nozzle to cool down.
• Remove the installed nozzle (1, 6 or 7) by turning the
nozzle towards the «
» symbol and pulling it out of
the body of the hot hair styler.
• Wipe the body of the hot hair styler with a slightly
damp cloth, then wipe dry.
• Clean the air inlets (4) with a brush.
• Do not immerse the unit into water or any other
liquids.
• Do not use abrasive cleaners or solvents to clean the
hot hair styler body and nozzles (1, 6, 7).
STORAGE
• Disconnect the unit from the mains and clean it.
• Do not wind the power cord around the hot air styler,
as this can damage the cord or the unit body.
• For easy storing there is a hanging loop (7), you can
hang the hot air styler on this loop provided that no
water gets on the unit in this position.
• Keep the unit in a dry cool place out of reach of
children and disabled persons.
DELIVERY SET
1. Hot hair styler — 1 pc.
2. Concentrator nozzle — 1 pc.
3. 38 mm thermal brush — 1 pc.
4. 50 mm thermal brush — 1 pc.
5. Manual — 1 pc.
TECHNICAL SPECIFICATIONS
• Supply voltage: 220-240 V, ~50-60 Hz
• Rated input power: 1000 W

Похожие устройства

Скачать