Stingray ST-KT3018A [6/9] Remove all packaging materials

Превью страниц Страница 6 / 9

• To reduce the risk of fire or electrical shock, do not remove the bottom cover.

• To prevent discoloration, do not place tea bags, coffee, instant noodle, or any other liquids or items inside the kettle.

• Do not wash under direct running water as this will damage the control panel. Clean with a soft moist cloth.

• Do no use or store the unit in direct sunlight or near other heat sources (oven, stove, etc.).

• The kettle may have difficulty bringing water to boil when used in high altitudes or extreme cold conditions.

• Do not disassemble or attempt to repair on your own.

PLEASE SAVE THiS INSTRUCTION!

BEFORE FIRST USE

Remove all packaging materials.

Fill kettle to the MAX line and bring to a boil. When the unit completes the boiling cycle, discard the water - repeat the process 2 to 3 times. This will remove any dust or residue remaining from the

manufacturing process.

BOILING WATER

1. Remove the unit from base.

2. Open the lid.

3. Fill the kettle with your desired amount of water, but not less than MIN line. Do not fill above the MAX line.

4. Close the lid.

5. Place the kettle on base, ensuring that it is correctly engaged.

6. Connect cord to power outlet and switch unit ON; the light indicator lights up.

7. The kettle will switch off automatically when water has come to a boil.

After use, unplug and empty unused water. Ensure kettle is switched off before removing from base. Heating can be stopped at any time by the operating the switch.

As a safety feature, the unit may not start immediately after shutting off. Please allow 15 to 20 seconds for kettle to cool down before switching on again.

If kettle ever boils dry, please wait 15 minutes for unit to cool before refilling with cold water. The safety cut-off will automatically reset during this time.

Do not open lid when in operation. Steam escaping from the spout is hot. This appliance is only suitable for heating water; do not use any other liquids.

Basic operation:

Power button

（ON/OFF）：

In the power state, the power button lights up. If no operation is performed within 3 minutes, the buzzer will sound the kettle will automatically enter the standby state, and the power button light

will be converted into a breathing light. In standby mode,press the power button to start the machine, and then press the power button again to enter the function of boiling water (if no temperature is

set, continue the temperature value used last time), after the water boils, the buzzer will sound "DI" "DI" "DI" , and the temperature icon light will be off 30 seconds later.

Temperature setting

（℉/℃ transfer ）：

Short press ，

When under mode of ℃，the adjustment rage is 40-100℃ in every 10℃ as a level. Under mode of ℉, the set temperature is adjusted by adding or subtracting 18°F

Range 104-212°F. Long press the key for 2-3 seconds to switch between ℉ and ℃.

Keep warm Key: short press , The buzzer makes a sound, the keep warm icon is displayed on the display screen, and after selecting the required set temperature , the keep warm state is

automatically entered, and the keep warm time is 2 hours. When the water temperature is lower than the set value of about 5 degrees, the heating is resumed, and the cycle runs until the keep

Warm time is completed.

Temperature Icon ：Display real-time temperature and the set temperature

The color of the indicator light changes with different temperature.

Below 40℃: Bright white blue

40-49℃: Bright green

50-59℃: Light blue；