HP Deskjet Ink Advantage 4615 (CZ283C) Руководство по эксплуатации онлайн [111/228] 41077

• Make sure the telephone you use to initiate the fax call is connected directly to

the printer. To send a fax manually, the telephone must be connected directly

to the port labeled 2-EXT on the printer, as shown in the illustration.

1 Telephone wall jack

2 Use the phone cord supplied in the box with the printer to connect to the "1-LINE"

port

3 Telephone

• If you are sending a fax manually from your phone that is connected directly to

the printer, you must use the keypad on the telephone to send the fax. You

cannot use the keypad on the printer control panel.

NOTE: If using a serial-type phone system, connect your phone directly on

top of the printer cable which has a wall plug attached to it.

The printer cannot receive faxes, but can send faxes

Solution:

• If you are not using a distinctive ring service, check to make sure that the

Distinctive Ring feature on the printer is set to All Rings. For more

information, see

Change the answer ring pattern for distinctive ring.

•If Auto Answer is set to Off, you need to receive faxes manually; otherwise,

the printer cannot receive the fax. For information on receiving faxes manually,

see

Receive a fax manually.

• If you have a voice mail service at the same phone number you use for fax

calls, you must receive faxes manually, not automatically. This means that you

must be available to respond in person to incoming fax calls. For information on

setting up the printer when you have a voice mail service, see

Case F: Shared

voice/fax line with voice mail. For information on receiving faxes manually, see

Receive a fax manually.

Solve fax problems 107