Hikvision DS-2CD8264 Инструкция по эксплуатации онлайн [59/95] 109326

User Manual of Network Camera

You can configure the camera to trigger the alarm when the lens is covered and take

alarm response action.

Steps:

1. Enter the Tamper-proof Settings interface:

Configuration > Advanced Configuration > Events > Tamper-proof

Figure 6-28 Tamper-proof Alarm

2. Check Enable Tamper-proof checkbox to enable the tamper-proof detection.

3. Set the tamper-proof area; refer to Step 1 Set the Motion Detection Area in

Section 6.6.1.

4. Click to edit the arming schedule for tamper-proof. The arming

schedule configuration is the same as the setting of the arming schedule for motion

detection. Refer to Step 2 Set the Arming Schedule for Motion Detection in Section

6.6.1.

5. Check the checkbox to select the linkage method taken for the tamper-proof.

Audible warning, notify surveillance center, send email and trigger alarm output are

selectable. Please refer to Step 3 Set the Alarm Actions for Motion Detection in

Section 6.6.1.

6. Click to save the settings.