Hikvision DS-2CD8264 [73/95] Configuring nas settings

User Manual of Network Camera

Chapter 7 Storage Settings

Before you start:

To configure record settings, please make sure that you have the network storage

device within the network or the SD card inserted in your camera.

7.1 Configuring NAS Settings

Before you start:

The network disk should be available within the network and properly configured to

store the recorded files, log files, etc.

Steps:

1. Add the network disk

(1) Enter the NAS (Network-Attached Storage) Settings interface:

Configuration > Advanced Configuration > Storage > NAS

Figure 7-1 Add Network Disk

(2) Enter the IP address of the network disk, and enter the default file.

Note: Please refer to the User Manual of NAS for creating the file path.

(3) Click to add the network disk.

Note: After having saved successfully, you need to reboot the camera to activate

the settings.

2. Initialize the added network disk.

(1) Enter the HDD Settings interface (Advanced Configuration > Storage >

Storage Management), in which you can view the capacity, free space, status,

type and property of the disk.

Figure 7-2 Initialize Disk

(2) If the status of the disk is Uninitialized, check the corresponding checkbox to

select the disk and click to start initializing the disk.