Magnit RMS-1600 Инструкция по эксплуатации онлайн [6/20] 111047

The garment steamer comes with a practical

accessory, Fabric Brush, to attach this accessory to

the Steam spout;

1．Turn off the steamer and wait until no steam

emits from the Steam spout．

2．Fabric brush’s pegs aim and insert the holes

on the Steam spout. See Figure 5．

3．Push the brush and firm it in place．

Figure 5

CAUTION：

Do not install the accessory while steam emitting from the Steam spout and avoid burns

Accessory assembly

1．Unplug the Power Cord, and turn the Switch to the “Off” or “0” position.

2．Remove the Water Tank, turn it upside down, and unscrew the Valve Cap. Fill the Water

Tank with cool water, and replace the Valve Cap. hot water is forbidden. To prolong the lifetime

of your steamer, we recommend using distilled or de-mineralized water. Place the water tank

back into the unit and make sure it is sitting properly and securely in the flume. Do not let the

steamer working with a dry water tank or else you can damage the unit.

3. Plug the unit into an electrical outlet.

Instruction for use

Installation instructions

3. Рull and open the folding rack, push bar from left to right and fix the crossbar;

4. When finish Ironing, push Bar from right to left and fold rack;

↓

PUSH

↓

Pull out

↓

Press

↓