Ducati 996 (1999) Инструкция по эксплуатации онлайн [41/80] 114429

Checking the coolant level (fig. 28.1)

Check the coolant level in the expansion reservoir, on the

LH side of the motorcycle.

The coolant level must be between the MAX and MIN

marks.

Top up if the level is too low.

Remove the l.h. body panel and the fuel tank. Lift the tail

guard and undo the rear screw (2, fig. 28.2). Remove the

tank from its front clamping by pulling the tank

backwards. Move it to the right leaving fuel tubing

connected.

Unscrew the filler (1, fig. 28.1) and add a mixture

consisting of water and antifreeze SHEEL Advance

Coolant or Glycoshell (35-40% of the volume) up to MAX

mark.

Refit the filler (1) and reassemble all removed parts. This

mixture improves operating conditions (coolant will start

freezing at –20°C/–4°F).

Coolant circuit capacity: 3.5 cu dm (liters) / 0.92 US Gall.

fig. 28.2

fig. 28.1