Ducati 996 (1999) Инструкция по эксплуатации онлайн [44/80] 114429
![Ducati 996 (1999) Инструкция по эксплуатации онлайн [44/80] 114429](/views2/1121000/page44/bg2c.png)
44
E
Throttle cable adjustment
The throttle twistgrip must have a free play of 1.5 - 2 mm
/ 0.06-0.09 in. measured at the edge of the twistgrip, at
all positions of the handlebars. If it needs adjusting, use
the suitable adjuster (2, fig. 31) provided on the throttle
control.
Checking battery electrolyte level (fig. 32)
Remove the r.h. body panel to check battery liquid level
(see page 38).
Battery liquid level must be maintained between the
maximum (UPPER LEVEL) and minimum (LOWER
LEVEL) marks on battery front.
If battery liquid level is too low, remove the caps (1) and
top up carefully with distilled water up to the upper level
line, using a small syringe or a plastic funnel.
When adding distilled water, make sure the breather tube
(2) is connected to battery breather outlet. The breather
tube must be so placed that it does not kink or twist.
Important
Add only distilled water to the battery.
Tap water may shorten battery life.
A kinked or twisted breather tube may lead to
overpressure and damage the battery.
Warning
The battery contains sulphuric acid (electrolyte).
Avoid contact with skin and eyes as it may cause severe
burns.
If you spill some electrolyte on your skin, wash the
affected area with abundant water and seek medical
advice.
Electrolyte is poisonous: if you swallow it accidentally,
drink abundant milk or water, eat some magnesia,
scrambled eggs or drink vegetable oil and seek medical
advice without delay.
Always wear adequate protective clothing and a visor
1,5 ÷ 2 mm
2
1
fig. 31
Содержание
- Fig 17 23
- Important adjust both fork legs to same settings 23
- Standard factory setting is as follows compression 12 clicks rebound 11 clicks max setting range for softest damping adjustment is 14 clicks both for rebound and compression to change the preload of the spring inside each fork leg turn the hex adjusting nut 2 with a 22 mm 0 7 in hexagon wrench preload setting range a fig 17 is from 25 to 10 mm 0 8 to 0 9 in factory setting is 20 mm 0 9 in 23
- Max level 33
- 31 1090 42 57
- Label location fig b 72
- 21 31 30 29 28 27 80
- 39 40 41 42 80
- Passing horn 80
- Presenti solo nella versione 4 iniettori fitted on the 4 injector version only 80
- U s a australia versions 80
Похожие устройства
- Stiga SHM 170 Инструкция по эксплуатации
- Ducati 748 (1999) Инструкция по эксплуатации
- Stiga SHM 180 Инструкция по эксплуатации
- Ducati 620S (2002) Инструкция по эксплуатации
- Stiga SHP 60 Инструкция по эксплуатации
- Suzuki XF650 FREEWIND (1996) Инструкция по эксплуатации
- Stiga SHT 4620 A Инструкция по эксплуатации
- Stiga SHT 500 Инструкция по эксплуатации
- Stiga SHT 600 Инструкция по эксплуатации
- BMW 1200GS Инструкция по эксплуатации
- Stiga SP 350 Инструкция по эксплуатации
- BMW R1150R ABS (2001) Инструкция по эксплуатации
- Stiga SP 350 Q Инструкция по эксплуатации
- BMW R1150RT ABS (2001) Инструкция по эксплуатации
- Stiga SP 352 Инструкция по эксплуатации
- BMW R1150GS (2000) Инструкция по эксплуатации
- Stiga SP 355 Инструкция по эксплуатации
- BMW R1100S (1999) Инструкция по эксплуатации
- Stiga SP 380 Q Инструкция по эксплуатации
- BMW R1200C (1999) Инструкция по эксплуатации