Ducati 996 (1999) Инструкция по эксплуатации онлайн [48/80] 114429

Replacing bulbs

Before replacing a burnt-out bulb, make sure that the

new one complies with voltage and wattage as specified

on page 64, “Electric System”, for that lighting device.

Always check for new bulb proper operation before

refitting removed parts.

Headlamp

To gain access to headlamp bulbs proceed as follows:

Disassembly:

low beam bulb (fig. 35.1): remove the rubber cover (1).

Press the lower quick-release button to disconnect the

connector (2).

L.h. high beam bulb (fig. 35.2): disconnect the

connector (3) of the white bulb cable from the front

wiring, remove the rubber cover (1) from the headlamp

body and pull out the bulb cable.

Note

The black ground mass cable connector does not

need to be disconnected to replace the headlamp bulbs.

Release the clip (4) that secures the bulb and remove it

from the socket (fig. 35.1 and 35.2).

Note

Be careful to hold the new bulb at the base only.

Never touch the transparent body with your fingers or it

will blacken resulting in reduced bulb brilliancy.

fig. 35.2

fig. 35.1