Ada IRONWELD 200 А00348 [5/36] Iron weld 160 180 200 220

MEASUREMENT FOUNDATION

IronWeld 160/180/200/220

- It’s forbidden to touch electrode with bare hands. It’s forbidden to wear wet or damaged gloves or protec-

tive clothes.

- Don’t touch the parts under voltage.

- It’s forbidden to touch electrode that is in contact with welding surface, ground or other electrode which is

connected to another welder.

- Never weld tanks that contain ammable and explosive materials.

- To avoid accidents when working at height, follow safety regulations.

- Be careful, there must be no bystanders on the working site.

- Welders radiate electromagnetic waves and make noises. So be sure that there are no people with cardiac

stimulator or other equipment that can be inuenced with electromagnetic waves and radio frequencies.

- Before operation check the connection of cables and earth. From time to time check the condition of weld-

ing cable. If you use this instrument regularly, check it once per month.

- Only qualied specialists can do servicing.

- If you don’t use welder for a long time, store it in place wih good ventilation.

- Regularly clean welder from dust. Check holding elements. They must be tighten. Check ectromagnetic

system, current adjusting knob and so on.

- Dust in the air and also corrosive substances mustn’t exceed permissible levels.

- It’s necessary to provide access for air for the welder. There must be free space around welder, about 50

cm.

- Ensure that there are no metallic or foreign objects near the welder. They can get into the welder.

- Take out the electrode if you don’t use welder for a long time.

- Don’t place the welder on the vibrating surface.

- Ensure that there are no noises in the place of adjustment of welder.