Ada LASERMARKER А00404 [5/26] Laser marker

LaserMarker

5. Adjust the laser line to desired position.

6. When need to project the horizontal line on the wall,

turn the tool until the bubble in the horizontal level is

between the two lines.

7. When need to project the vertical line on the wall,

turn the tool until the bubble in the vertical level is be-

tween the two lines.

8. When need a line with any angle to the above laser

line, keep the tool static, rotate the alignment plate until

the “0” scale align to the pointer.

9. Turn the tool according to the desired angle and

make the pointer indicate the corresponding scale on

the alignment plate.

● Tips:

- The tool is designed to project a baseline on the sur-

face of the object. The reflection of the baseline on any

other surfaces cannot be used as a reference.

- For convenient operation, the project direction of the

laser line is generally from bottom to top and /or from

right to left when operate the laser tool.

- If the laser line is darken or not visible during opera-

tion, please check and replace the battery.

- The tool is recommended for indoor use. The visibility

of the laser will be affected if the tool is used outdoor.