Sea-Doo GTX Limited iS 2009 Инструкция по эксплуатации онлайн [223/555] 12053
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Sea-Doo GTX Limited iS 2009 Инструкция по эксплуатации онлайн [223/555] 12053

Sea-Doo RXT iS 2009 Инструкция по эксплуатации онлайн [223/555] 12044
Section 03 ELECTRONIC MANAGEMENT SYSTEMS
Subsection 04 (MONITORING SYSTEM AND FAULT CODES)
FAULT
CODE
MODULE DESCRIPTION POSSIBLE CAUSE SERVICE ACTION
P0217
ECM
High engine coolant
temperature detected
Engine overheated or
damaged sensor
Check for debri
s or blockage in
cooling system.
Check the sensor for approximately
2280 to 2736 oh
ms at 19 to 21°C
(66to70°F).
Check for approximately 2280 to
2736 ohms at 1
9to21°C
(66to70°F)betweenECM
connector pins A-A1 and A-J2.
Refer to the S
ervice Manual for more
details.
P0222
ECM
TAS (Throttle
Accelerator sensor) 2
fault (shor
t circuit to
GND)
Damaged sensor,
damaged circuit wires,
damaged connector or
damaged ECM pins
Check syste
m circuits B-A3, B-B3, B-J3.
Check for 0 volt on sensor connector
pin B.
Check for 5 v
olts on sensor connector
pin A.
Check for 0.25 to 1.5 volts on sensor
connector
pin C.
Refer to the Service Manual
for more details.
P0223
ECM
TAS (Throttle
Accelera
tor sensor) 2
fault (short circuit to
battery)
Damaged sensor,
damaged circuit wires,
damaged connector or
damaged ECM pins
Check system circuits B-A3, B-B3, B-J3.
Check for 0 volt on sensor connector
pin B.
Check for 5 volts on sensor connector
pin A.
Check for
0.25 to 1.5 volts on sensor
connector pin C.
Refer to the Service Manual
for more
details.
P0231
ECM
Fuel pump open
circuit or short to
ground
Damaged pump,
damaged circuit wires,
damaged connector or
damaged ECM output
pins.
Check for approximately 1 ohm
between
pins A and B of the fuel
pump connector.
Check fuse 6 (refer to
WIRING
DIAGRAM
).
Check for damaged circuit wires.
Check for damaged connector,
damage
d ECM output pins or ECM
failure.
Refer to the Service Manual
for mo
re details.
P0232
ECM
Fuel pump short
circuit to battery
Damaged pump,
damaged circuit wires,
damaged connector or
damaged ECM output
pins
Check for approximately 1 ohm
betwe
en pins A and B of the fuel
pump connector.
Check fuse 6 (refer to
WIRING
DIAGR
AM
).
Check for damaged circuit wires.
Check for damaged connector,
dama
ged ECM output
pins or ECM failure.
Refer to the Service Manual for
more
details.
200 smr2009-029

Похожие устройства

Скачать