Sea-Doo GTX Limited iS 2009 Инструкция по эксплуатации онлайн [222/555] 12053
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Sea-Doo GTX Limited iS 2009 Инструкция по эксплуатации онлайн [222/555] 12053

Sea-Doo RXT iS 2009 Инструкция по эксплуатации онлайн [222/555] 12044
Section 03 ELECTRONIC MANAGEMENT SYSTEMS
Subsection 04 (MONITORING SYSTEM AND FAULT CODES)
FAULT
CODE
MODULE DESCRIPTION POSSIBLE CAUSE SERVICE ACTION
P0123
ECM
TAS (Throttle
Accelerator sensor) 1
fault (short circuit to
battery)
Damaged sensor,
damaged circuit wires,
damaged connector or
damaged ECM pins.
Check system ci
rcuits B-E1, B-K1, B-K3.
Check for 0 volt on sensor connector
pin E.
Check for 5 vol
ts on sensor connector
pin D.
Check for 0.5 to 3 volts on sensor
connector
pin F.
Refer to the Service Manual
for more deta
ils.
P0127
ECM
Intercoole
r system
fault
High air intake
temperatur
e detected.
Fault detected when the
engine is running and
stopped.
Blocked intercooler water
circuit
Clean intercooler water circuit system.
Refer to the Service Manual for more
details.
P0201
ECM
Injection Power
Stage fault - open
line/Cylinder 1
Damaged injector,
damaged circuit wires,
damaged connector or
damaged ECM output
pins
Check for 11.4 to 12.6 ohms
between engine connector pin 2 and
ECM connec
tor pin A-K1.
Check for 12 volts on pin 2 of
injector connector.
Check fus
e 8 (refer to
WIRING
DIAGRAM
).
Check for damaged circuit wires.
Refer to
the Service Manual for more
details.
P0202
ECM
Injection Power
Stage fault - open
line/Cylinder 2
Damaged injector,
damaged circuit wires,
damaged connector or
damaged ECM output
pins
Check fo
r 11.4 to 12.6 ohms
between engine connector pin 2 and
ECM connector pin A-K1.
Check fo
r 12 volts on pin 2 of
injector connector.
Check fuse 8 (refer to
WIRING
DIAGRA
M
).
Check for damaged circuit wires.
Refer to the Service Manual for more
detail
s.
P0203
ECM
Injection Power
Stage fault - open
line/Cylinder 3
Damaged injector,
damaged circuit wires,
damaged connector or
damaged ECM output
pins
Check for 11.4 to 12.6 ohms
betwe
en engine connector pin 3 and
ECM connector pin A-J1.
Check for 12 volts on pin 2 of
injec
tor connector.
Check fuse 9 (refer to
WIRING
DIAGRAM
).
Chec
k for damaged circuit wires.
Refer to the Service Manual for more
details.
smr2009-029 199

Похожие устройства

Скачать