Sea-Doo GTX Limited iS 2009 Инструкция по эксплуатации онлайн [325/555] 12053

Section 05 ELECTRICAL SYSTEM

Subsection 04 (CHARGING SYSTEM)

Use the vacuum/pressure pump in the ENGINE

LEAK TEST KIT (P/N 295 500 352)

295500352

Set vacuum/pressure pump to PRESSURE.

smr2009-031-012_a

1. Pressure selected

Connect vacuum/pressure pump to the vent hose

end.

Squeeze the vacuum/pressure pump handle sev-

eral times to push air out through the check valve.

Check valve must let air flow out.

smr2009-033-010_a

AIR M

UST FLOW OUT

Set vacuum/pressure pump to VACUUM.

smr2009-031-013_a

1. Vacuum selected

Squeeze th

e vacuum/pressure pump handle sev-

eral times

to draw air in through the check valve.

Check valve must hold air with 10 in Hg (-34 kPa)

of vacuum without leaking.

smr2009-033-010_b

MUST HOLD AIR IN THIS POSITION

If any test failed, check the vent hose and if good,

replace check valve.

At installation, ensure to position check valve with

black side connected to vent line and ORANGE

side inserted in the grommet protruding through

the hull as shown.

302 smr2009-033