Sea-Doo GTX Limited iS 2009 Инструкция по эксплуатации онлайн [331/555] 12053
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Sea-Doo GTX Limited iS 2009 Инструкция по эксплуатации онлайн [331/555] 12053

Sea-Doo GTX Limited iS 2009 Инструкция по эксплуатации онлайн [331/555] 12053
Section 05 ELECTRICAL SYSTEM
Subsection 04 (CHARGING SYSTEM)
WARNING
Failure to remove the sealing tube could re-
sult in an explosion.
1. Remove caps and fill battery to UPPER LEVEL
line with electrolyte (specific gravity: 1.265 at
21°C (70°F)).
NOTE: This battery may fill slower than others
due to the anti-spill check ball design.
A17E0FB
2
1
3
1. Sealing tube removed
2. Batter
yelectrolyte
3. Upper level line
NOTE: Place the cell caps over the cell openings
engaging only the first thread to prevent cell
contamination and acid splatter during charging.
Do not screw caps on tightly.
2. Allow the battery to stand for 30 minutes MIN-
IMUM to allow the electrolyte time to soak
through the battery cells plates.
A17E0GA
1
1. 30 minutes
3. Readjust the electrolyte level to the UPPER
LEVEL line.
A17E0RB
1
2
1. Battery electrolyte
2. Upper level line
4. Connect a 2 A battery charger for 3 to 5 hours.
A17E0IA
-
+
2
1
3
Step 1: Connect + lead to battery + post
Step 2: Connect - lead to battery - post
Step 3:
Connect battery charger to AC outlet
WARNING
Gases given off by a battery being charged
are highly explosive. Always charge in a well
ventilated area. Keep battery away from cig-
arettes, open flames, welding operations and
any other types of ignition. Always turn bat-
tery charger off prior to disconnecting cables.
Otherwise a spark will occur possibly causing
the battery to explode.
NOTICE
If ch
arging rate increases above
2.4
A reduce it immediately. If cell tempera-
tur
e rises above 50°C (122°F) or if the casing
fee
ls hot, discontinue charging temporarily or
red
uce the charging rate.
5. Disconnect battery charger.
308 smr2009-033

Похожие устройства

Скачать