Home
Главная
Sea-Doo
Гидроцикл
GTX Limited iS 2009
Инструкция по эксплуатации Страница: 468

Sea-Doo GTX Limited iS 2009 Инструкция по эксплуатации онлайн [468/555] 12053

Section 07 BODY AND HULL

Subsection 01 (SUSPENSION (iS))

PROCEDURES

SHOCK ABSORBER

Shock Absorbe

r Removal

1. Remove the moving deck. Refer to

BODY

sub-

section.

2. Remove tapes securing central bellows to

mounting plate.

3. Move down cen

tral bellows to reach shock

holder screw

4. Remove and discard the four screws securing

the shock holder.

NOTE: Using lateral supports, raise front arm to

reach front screws.

smr2009-041-003_a

1. Front retaining screws

smr2009-041-004_a

1. Rear retaining screws

5. Remove shock absorber with mounting plate

and shock holder.

NOTE: Take care not to let the spring protector fall

into the hull.

6. Remove and discard the bolt securing shock ab-

sorber to shock holder.

smr2009-041-005_a

1. Shock absorber lower bolt (discard)

2. Shock holder

7. Detach the top of shock absorber from mount-

ing plate. Discard bolt.

smr2009-041-006_a

1. Shock absorber upper bolt (discard)

2. Mounting plate

Shock Absorber Inspection

NOTE: Because of gas pressure, strong resis-

tance is felt when compressing shock.

To inspect shock operation, or if suspecting an in-

ternal leak between oil chamber and gas chamber,

check shock as follows:

1. Grab the shock absorber body firmly and press

the other end against the floor.

1.1 Verify the compression stroke when the

rod is fully extended.

1.2 Make sure that shock absorber rod can be

completely inserted in the shock body.

smr2009-041-040_a

smr2009-041 445

Sea-Doo GTX Limited iS 2009 Инструкция по эксплуатации онлайн [468/555] 12053

Похожие устройства