Yamaha CLP-F01PB Инструкция по эксплуатации онлайн [71/80] 12173

Yamaha CLP-F01PB Инструкция по эксплуатации онлайн [71/80] 12173
CLP-F01 èËÎÓÊÂÌËÂ
71
(2) Universal Non-Realtime Message (GM On)
General MIDI Mode On
Data format: [F0H] -> [7EH] -> [XnH] -> [09H] -> [01H] ->
[F7H]
F0H = Exclusive status
7EH = Universal Non-Realtime
7FH = ID of target device
09H = Sub-ID #1=General MIDI Message
01H = Sub-ID #2=General MIDI On
F7H = End of Exclusive
or
F0H = Exclusive status
7EH = Universal Non-Realtime
XnH = When received, n=0~F.
X = don’t care
09H = Sub-ID #1=General MIDI Message
01H = Sub-ID #2=General MIDI On
F7H = End of Exclusive
When the General MIDI mode ON message is received, the
MIDI system will be reset to its default settings.
This message requires approximately 50ms to execute, so
suffi-cient time should be allowed before the next message is
sent.
8. SYSTEM EXCLUSIVE MESSAGES (XG Standard)
(1) XG Native Parameter Change
Data format: [F0H] -> [43H] -> [1nH] -> [4CH] -> [hhH] ->
[mmH] -> [llH] -> [ddH] -> [F7H]
F0H = Exclusive status
43H = YAMAHA ID
1nH = When received, n=0~F.
When transmitted, n=0.
4CH = Model ID of XG
hhH = Address High
mmH =
Address Mid
llH = Address Low
ddH = Data
|
F7H = End of Exclusive
Data size must match parameter size (2 or 4 bytes).
When the XG System On message is received, the MIDI sys-
tem will be reset to its default settings.
The message requires approximately 50ms to execute, so
sufficient time should be allowed before the next message is
sent.
(2) XG Native Bulk Data (reception only)
Data format: [F0H] -> [43H] -> [0nH] -> [4CH] -> [aaH] ->
[bbH] -> [hhH] -> [mmH] -> [llH] ->[ddH] ->...->
[ccH] -> [F7H]
F0H = Exclusive status
43H = YAMAHA ID
0nH = When received, n=0~F.
When transmitted, n=0.
4CH = Model ID of XG
aaH = ByteCount
bbH = ByteCount
hhH = Address High
mmH =
Address Mid
llH = Address Low
ddH = Data
| |
| |
ccH = Check sum
F7H = End of Exclusive
Receipt of the XG SYSTEM ON message causes reinitializa-
tion of relevant parameters and Control Change values. Allow
sufficient time for processing to execute (about 50 msec)
before sending the CLP-F01 another message.
XG Native Parameter Change message may contain two or
four bytes of parameter data (depending on the parameter
size).
•For information about the Address and Byte Count values,
refer to Table 1 below. Note that the table’s Total Size value
gives the size of a bulk block. Only the top address of the
block (00H, 00H, 00H) is valid as a bulk data address.
9. SYSTEM EXCLUSIVE MESSAGES
(Clavinova MIDI Format)
Data format:
[F0H] -> [43H] -> [73H] -> [xxH] -> [nnH] -> [F7H]
F0H = Exclusive status
43H = Yamaha ID
73H = Clavinova ID
01H = Product ID (CLP common)
or
7FH= Extended Product ID
47H = Product ID
nnH = Substatus
nn Control
02H Internal MIDI clock
03H External MIDI clock
06H Bulk Data (the bulk data follows 06H)
F7H = End of Exclusive
* When nn=02H or 03H, CLP common ID (01H) is
recognized as well as 7FH, 47H.
BULK DUMP FORMAT
F0H, 43H, 73H
75F, xxH = Product ID
06H = Bulk ID
05H = Sequence data
0nH, 0nH, 0nH, 0nH = Data length
[BULK DATA] =
[CHECK SUM (1byte)] = 0-sum (BULK DATA)
F7H = End of Exclusive
10.
SYSTEM EXCLUSIVE MESSAGES (Special Control)
Data format: [F0H] -> [43H] -> [73H] -> [7FH] ->[47H] ->
[11H] -> [0nH] -> [ccH] -> [vvH] -> [F7H]
F0H = Exclusive status
43H = Yamaha ID
73H = Clavinova ID
7FH = Extended Product ID
47H = Product ID
11H = Special control
0nH = Control MIDI change (n=channel number)
cc = Control number
vv = Value
F7H = End of Exclusive
Control 0n ccH vvH
Split Point Always 00H 14H
14H : Split Key Numbe
r
Metronome Always 00H 1BH 00H : off
01H :
02H : 2/4
03H : 3/4
04H : 4/4
05H : 5/4
06H : 6/4
7FH : No accent
Damper Level
ch: 00H-0FH 3DH(Sets the Damper Level
for each channel)
00H-7FH
Channel Detune
ch: 00H-0FH 43H (Sets the Detune value
for each channel)
00H-7FH
Voice Reserve
ch: 00H-0FH 45H 00H : Reserve off
7FH : on*
*
When Volume, Expression is received for Reserve On, they
will be effective from the next Key On. Reserve Off is normal.
11. SYSTEM EXCLUSIVE MESSAGES (Others)
Data format:
[F0H] -> [43H] -> [1nH] -> [27H] -> [30H] -> [00H]
-> [00H] -> [mmH] -> [
ll
H] -> [ccH] -> [F7H]
Master Tuning (XG and last message priority) simultaneously
changes the pitch of all channels.
F0H = Exclusive Status
43H = Yamaha ID
1nH = When received, n=0~F.
When transmitted, n=0.
27H = Model ID of TG100
30H = Sub ID
00H =
00H =
mmH = Master Tune MSB
llH = Master Tune LSB

Содержание

2 Universal Non Realtime Message GM On General MIDI Mode On Data format FOH 7EH XnH 09H 01H F7H FOH Exclusive status 7EH Universal Non Realtime 7FH ID of target device 09H Sub ID 1 General MIDI Message 01H Sub ID 2 General MIDI On F7H End of Exclusive or FOH Exclusive status 7EH Universal Non Realtime XnH When received n 0 F X don t care 09H Sub ID 1 General MIDI Message 01H Sub ID 2 General MIDI On F7H End of Exclusive When the General MIDI mode ON message is received the MIDI system will be reset to its default settings This message requires approximately 50ms to execute so suffi cient time should be allowed before the next message is sent 8 SYSTEM EXCLUSIVE MESSAGES XG Standard 1 XG Native Parameter Change Data format FOH 43H 1 nH 4CH hhH mmH H ddH F7H FOH Exclusive status 43H YAMAHA ID 1пН When received n 0 F When transmitted n 0 4CH Model ID of XG hhH Address High mmH Address Mid H Address Low ddH Data I F7H End of Exclusive Data size must match parameter size 2 or 4 bytes When the XG System On message is received the MIDI sys tem will be reset to its default settings The message requires approximately 50ms to execute so sufficient time should be allowed before the next message is sent 2 XG Native Bulk Data reception only Data format FOH 43H OnH 4CH aaH bbH hhH mmH H ddH ccH F7H FOH Exclusive status 43H YAMAHA ID OnH When received n 0 F When transmitted n 0 4CH Model ID of XG aaH ByteCount bbH ByteCount hhH Address High mmH Address Mid H Address Low ddH Data I I I I ccH Check sum F7H End of Exclusive Receipt of the XG SYSTEM ON message causes reinitializa tion of relevant parameters and Control Change values Allow sufficient time for processing to execute about 50 msec before sending the CLP F01 another message XG Native Parameter Change message may contain two or four bytes of parameter data depending on the parameter size For information about the Address and Byte Count values refer to Table 1 below Note that the table s Total Size value gives the size of a bulk block Only the top address of the block OOH OOH OOH is valid as a bulk data address 9 SYSTEM EXCLUSIVE MESSAGES Clavinova MIDI Format Data format FOH 43H 73H xxH nnH F7H FOH Exclusive status 43H Yamaha ID 73H Clavinova ID 01H Product ID CLP common or 7FH Extended Product ID 47H Product ID nnH Substatus nn Control 02H Internal MIDI clock 03H External MIDI clock 06H Bulk Data the bulk data follows 06H F7H End of Exclusive When nn 02H or 03H CLP common ID 01H is recognized as well as 7FH 47H BULK DUMP FORMAT F0H 43H 73H 75F xxH 06H 05H OnH OnH OnH OnH BULK DATA CHECKSUM 1byte F7H Product ID Bulk ID Sequence data Data length 0 sum BULK DATA End of Exclusive 10 SYSTEM EXCLUSIVE MESSAGES Special Control Data format FOH 43H 73H 7FH 47H 11H OnH ccH wH F7H FOH Exclusive status 43H Yamaha ID 73H Clavinova ID 7FH Extended Product ID 47H Product ID 11H Special control OnH Control MIDI change n channel number cc Control number vv Value F7H End of Exclusive Control On ccH vvH Split Point Always 00H 14H Metronome Always 00H 1BH 14H Split Key Number 00H off 01H 02H 2 4 03H 3 4 04 H 4 4 05H 5 4 06H 6 4 7FH No accent Damper Levelch 00H 0FH 3DH Sets the Damper Level for each channel 00H 7FH Channel Detune ch 00H 0FH 43H Sets the Detune value for each channel 00H 7FH Voice Reserve ch 00H 0FH 45H 00H Reserve off 7FH on When Volume Expression is received for Reserve On they will be effective from the next Key On Reserve Off is normal 11 SYSTEM EXCLUSIVE MESSAGES Others Data format FOH 43H 1 nH 27H ЗОН ООН 00H mmH H ccH F7H Master Tuning XG and last message priority simultaneously changes the pitch of all channels FOH Exclusive Status 43H Yamaha ID 1пН When received n 0 F When transmitted n 0 27H Model ID of TG100 30H SublD 00H 00H mmH Master Tune MSB H Master Tune LSB CLP F01 Приложение 71

Скачать