Philips QT4000 [5/104] English

General

- The appliance is equipped with an automatic voltage selector and is

suitable for mains voltages from 100 to 240 volts.

- The adapter transforms 100-240 volts to a safe low voltage of less

than 24 volts.

Charging

Charge the appliance fully before you use it for the rst time or after a long

period of disuse.

It takes approximately 10 hours to fully charge the appliance.

When it is fully charged, the appliance has a cordless operating time of up

to 35 minutes.

Note: For safety reasons, the epilator can only be used cordlessly. Make sure

the appliance is charged before use.

1 Make sure the appliance is switched off.

2 Insert the appliance plug into the appliance.

3 Put the adapter in the wall socket.

, The charging light on the adapter lights up green continuously to

indicate that the appliance is charging.

Note: The charging light on the adapter does not change colour and does not

go out when the appliance is fully charged.

4 After charging, remove the adapter from the wall socket and pull the

appliance plug out of the appliance.

Optimising the lifetime of the rechargeable battery

When you have charged the appliance for the rst time, we advise you to

use it until the battery is completely empty. Continue to use the appliance

until the motor almost stops running during a session. Then recharge the

battery. Follow this procedure at least twice a year.

Using the appliance

Always comb the beard and/or moustache with a ne comb before you

start trimming.

When you trim for the rst time, be careful. Do not move the trimmer

too fast. Make smooth and gentle movements.

Trimming with comb

1 Turn the Precision Zoom Lock™ adjustment ring to the

desired setting. The selected setting is the setting in the centre of the

adjustment ring.

See the table below for an overview of the settings and the resulting hair

lengths.

ENGLISH 5