Philips PT 870 [15/278] English

5 Put the small plug in the Jet Clean System and put the adapter in the

wall socket.

, The shaver holder automatically moves to its highest position.

The Jet Clean System is now ready for use.

Using the Jet Clean System

1 Place the shaver without protection cap upside down in the shaver

holder. Push down the locking lever completely to lock the shaver

into place.

, The battery symbol on the Jet Clean System goes on to indicate that

the shaver is being charged.

Note: The shaver cannot be placed in the Jet Clean System when the protection

cap is on the shaving unit.

2 Press the on/off button on the Jet Clean System to start the cleaning

program.

, The battery symbol on the Jet Clean System goes out.

, During the cleaning program, the cleaning symbol starts to ash and

the shaver is automatically lowered into the cleaning uid.

, The shaver automatically switches on and off several times

and moves up and down.

, The cleaning symbol ashes throughout the cleaning program, which

takes approx. 8 minutes.

, After the cleaning program, the battery symbol on the Jet Clean

System goes on to indicate that the shaver is being charged.

Note: If you press the on/off button of the Jet Clean System during the cleaning

program, the program aborts and resets. In this case, the cleaning stops

ashing and the shaver holder returns to its starting position. The shaver may

still be wet and dirty, because the cleaning program has not been nished.

Note: If you remove the adapter from the wall socket during the cleaning

program, the program aborts. The shaver holder remains in its current position.

When you put the adapter back into the wall socket, the shaver holder moves

to its highest position.

Note: When the uid level drops below the minimum level, the cleaning symbol

and the ‘uid low’ symbol start to ash with intervals and the shaver holder

returns to its starting position

ENGLISH 15