Polaris PSF 40 F Инструкция по эксплуатации онлайн [11/14] 13320

V. Operation of the appliance

Choosing a speed mode

Use buttons on the control panel to set a desirable speed of the fan.

Use «0» button to switch off the unit.

«1» button: low speed.

«2» button: medium speed.

«3» button: high speed.

Oscillating function

 To make the fan head move from side to side push the Oscillating pin down.

 To stop - pull the pin up.

Choosing a slope

 Choose a desirable slope angle.

VI. Cleaning and storage

 Switch off and unplug from the power supply before cleaning.

 We recommend the periodic cleaning of this fan by lightly running a vacuum cleaner nozzle over the fan

grill to remove any dust or dirt that may have accumulated inside or on the unit.

 Using a soft, moist cloth, with or without a mild soap solution, carefully clean the fan housing. Before

switching on remove the rest of the water using a soft and dry cloth.

 Do not allow water to drip on or into the fan motor housing.

 Don’t use sprays.

Attention: To protect against fire or electric shock, do not allow any water to drip on or into the fan. The

motor of the fan was lubricated during the assembling process in the plant. An additional lubrication while

using the appliance is not needed. There is also no need in any technical maintenance from the user. The

repair must be done just by qualified specialists of the service center only.

The unit should be kept in a clean and dry place.