Polaris PSF 40 D [10/13] Choosing a speed

IV. Appliance assembling

1. Install two parts of the base to make a cross-shape

platform.

2. Use four fixing screws to install bottom pipe into the cross-

shape platform.

3. Choose a desirable height of the extension pipe using the

screw.

8. Connect and tighten front and back grill using side holders.

V. Operation of the appliance

Choosing a speed

Use buttons on the control panel to set a desirable speed of the fan.

«0» to switch off the unit.

«1»: low speed.

VI. Oscillating function

 To make the fan move from side to side push the Oscillating pin down.

 To stop - pull the pin up.

VII. Cleaning and storage

 Switch off and unplug from the power supply before cleaning.

 We recommend the periodic cleaning of this fan by lightly running a vacuum cleaner nozzle over the fan

Attention: To protect against fire or electric shock, do not allow any water to drip on or into the fan. The

motor of the fan was lubricated during the assembling process in the plant. An additional lubrication while

using the appliance is not needed. There is also no need in any technical maintenance from the user. The

repair must be done just by qualified specialists of the service center.

The unit should be kept in a clean and dry place.

Fasten Height