Smeg KD90RW [5/8] Cleaning and maintenance

Ø ELECTRONIC PUSHBUTTONS:

Lights ON/OFF

0/1 OFF/1 speed

2-3-4 Speed adjustment

Filters reset button

OPTIONAL FUNCTIONS:

- AUTO POWER-OFF TIMER: Pushing one of the speed adjustment buttons (2-3-4)

twice, you will activate the “Auto power-off timer” function that turns the motor and light off

after 10 mins. The activation of such function is signalled by the blinking LED

above the pressed button.

- FILTERS CLEANING WARNING: When all the 4 LEDs blink at the same time (which is

programmed to happen every 100h of operation), the user is required to

clean/replace the filters .

Pressing the Reset button the 100h count will start again

Note: Pressing the reset button accidentally before the end of the 100h

cycle does not reset the filters cleaning memory

It is recommended that grease filters are cleaned every 100h and active

carbon filters are replaced every 200h.

CLEANING AND MAINTENANCE:

Before performing any cleaning and/or maintenance operation always disconnect

the hood from the mains supply.

Regular cleaning will ensure a good performance and extend the working life of the hood.

Special attention should be given to the grease filters and carbon filters (for recycling

hoods only).

Note: An excess of grease in the filter, as well as affecting the performance of the

hood, can also be a fire risk.

EXTERNAL CLEANING:

External and internal cleaning of the hood should be performed with a damp cloth and a

non-bleach liquid detergent,

absolutely avoiding solvents or abrasive substances.

is advisable to use specific products, following their instructions. When cleaning the steel

of the hood, we suggest rubbing in the same direction as the grain.

EN 05