Home
Главная
Freggia
Встраиваемая Посудомоечная Машина
DWI4108
Руководство пользователя Страница: 7

Freggia DWI4108 [7/44] Loading your dishwasher

To put rinse aid, remove the rinse aid compartment cap

by turning it.1 Fill the rinse aid compartment with rinse

aid until the rinse aid level indicator becomes dark; 2 re t

the cap and close it by turning it in a way that the nails

will correspond to one another. By checking the rinse

aid level indicator on the detergent dispenser, you can

understand whether or not your machine needs rinse

aid. A dark indicator b means that there is rinse aid in the

compartment, while a light indicator a shows that you

need to  ll the compartment with rinse aid.

The rinse aid level adjuster can be set to a position

between 1 and 6. Factory setting for rinse aid is the

position 3. You need to increase the degree of the

adjuster if water stains form on your dishes after a wash,

whereas you need to decrease the degree if a blue stain

is left when wiped by hand. 3

WARNING! Use only those rinse aid materials which are allowed for use in

the machine. As rinse aid residues left as a result of over owing will create

extremely high amounts of foam and thus reduce the washing performance,

remove the excess amount of rinse aid by wiping it with a rag.

LOADING YOUR DISHWASHER

If you properly place your dishes into the machine, you will be using it in the best way

in terms of energy consumption, washing and drying performance.

There are two separate baskets for you to load your dishes into your machine. You

can load into the lower basket such round and deep items as pots with long handles,

pot lids, plates, salad plates, cutlery sets.

The upper basket has been designed for tea plates, dessert plates, salad bowls,

cups and glasses. When placing long-stem glasses and goblets, lean them against

the basket edge, rack or glass supporter wire and not against other items. Do not

lean long glasses against one another or they cannot remain steady and may receive

damage.

It is more appropriate to locate the thin narrow parts into the middle sections of

baskets. You can place spoons among the other cutlery sets in order to prevent them

from sticking to one another. You are recommended to use the cutlery grid in order

to obtain the best result.

To avoid any possible injuries, always place such long-handle and sharp-pointed

dishes as serving fork, bread knife etc. with their sharp points facing down or

horizontally on the baskets.

WARNING! Place your dishes into your machine in a way that they will not

prevent the upper and lower spray arms from spinning.

TOP BASKET

• DISH RACK

There are dish racks on the upper

basket of your machine. a b You

can use these dish racks in open

or closed position. When they are

in open position a you can place

your cups on them; and when in

closed position b you can place

long glasses on the basket.

Also, you can use these racks by placing long forks, knives and spoons on them

laterally.

FILLING THE DETERGENT COMPARTMENT

Push the latch to open the detergent container as shown in

the image. 1 Detergent pod has level lines inside. It is possible

to measure the right detergent amount using these lines.

Detergent pod can take totally 40 cm

detergent. Open the

dishwasher detergent and pour into the larger compartment

b 25 cm

if your dishes are heavily soiled or 15 cm

if they are

less soiled.2

If your dishes have been kept dirty for a very long time, if

there are dried food wastes on them, and if you have overly

loaded the dishwasher, pour a 5 cm

detergent into the

prewash compartment and start your machine. You may have

to add more detergent into your machine, depending on the

degree of soil and on the water hardness level in your area.

COMBINED DETERGENT

Detergent manufacturers also produce combined detergents called “2 in 1”, “3 in 1”

or “5 in 1” etc.

“2 in 1” detergents contain detergent + salt or rinse aid. When using “2 in 1” detergents

make sure to check the speci cations of the tablet.

Other tablet detergents contain detergent + rinse aid + salt + varlous extra functions.

Generally, combined detergents produce su cient results under certain usage

conditions only.

Such detergents contain rinse aid and/or salt in preset amounts

• POINTS TO CONSIDER WHEN USING THIS TYPE OF PRODUCTS:

• Always make sure to check the speci cations of the product you will use

or whether or not it is a combined product.

• Check if the detergent used is appropriate for the hardness of mains water

that machine is appertaining to.

• Observe the instructions on packagings when using such products.

• If such detergents are in the form of tablets, never put them into the

interior section or the cutlery basket of the dishwasher. Always put the

tablets into the detergent compartment in the detergent dispenser.

• They produce good results for certain types of usage only. If you are using

this type of detergents, you need to contact the manufacturers and  nd

out about the suitable conditions of use.

• When the conditions of use of such products and the machine settings

are appropriate, they ensure savings in salt and/or rinse aid consumption.

• Contact the detergent manufacturers if you are not obtaining good wash

results (if your dishes stay calcareous and wet) after having used 2 in 1 or

3 in 1 detergents. The scope of warranty for your machine does not cover

any complaints caused by the use of these types of detergents.

Recommended usage: If you are using a combined detergent, then add

rinse agent into your machine ,switch the rinse agent settings into its lowest

(1) position and active the tablet detergent button in order to obtain better

results.If the water hardness level is above level 4,then it is necessary to  ll in

the salt container with salt.t is not recommended to use combined detergents

in fast programs.

WARNING: Should any problem, which you have not encountered before,

arise with the use of this type of detergents, contact the detergent

manufacturers directly.

• WHEN YOU GIVE UP USING COMBINED DETERGENTS

• Fill the salt and rinse aid compartments.

• Adjust the water hardness setting to the highest position ( 6 ) and run an

empty-wash.

• Adjust the water hardness level.

• Make the suitable rinse aid setting.

FILLING WITH RINSE AID AND MAKING THE SETTING

Rinse aid is used to prevent the stay of white water drops,

lime stains, white  lm strip-shaped stains that may form on

the dishes, as well as to increase the drying performance.

Contrary to the popular beliefs, it is used not only for

obtaining shinier dishes but also for obtaining su ciently

dried dishes. For this reason, care should be taken that

there is adequate amount of rinse aid in the rinse aid

compartment and only polishing material produced for use

at dishwashers should be used. If the rinse aid lamp on the

control panel becomes on  ll the rinse aid compartment

with rinse.

PREPARING THE MACHINE FOR USE

Freggia DWI4108 [7/44] Loading your dishwasher

Содержание

Похожие устройства