Kramer VS-211HDXL [7/12] Using the vs 211hdxl

Using the VS-211HDxl

5 Using the VS-211HDxl

This section describes how to:

• Connect the VS-211HDxl (see section 5.1

)

• Select the default master source signal (see section 5.2

)

• Connect the REMOTE connector (see section 5.3

)

5.1 Connecting the VS-211HDxl 3G HD-SDI Automati

c Standby

Switcher

To connect the VS-211HDxl, as illustrated in the example in Figure 2

, do the

following

1. Connect SDI input source 1 (for example, SDI video camera 1) to the IN 1

BNC connector.

2. Connect SDI input source 2 (for example, SDI video camera 2) to the IN 2

BNC connector.

3. Connect SDI acceptor 1 (for example, SDI display 1) to the OUT 1 BNC

connector.

4. Connect SDI acceptor 2 (for example, SDI display 2) to the OUT 2 BNC

connector.

5. Set the DEFAULT INPUT switch to whichever input is the master input, as

described in section 5.2

6. If needed, connect remote switches to the REMOTE IN 1 and IN 2

terminal block connectors, as described in section 5.3

7. Connect the 5V DC power adapter to the power socket and connect the

adapter to the mains electricity.

1 Switch OFF the power on each device before connecting it to your VS-211HDxl. After powering up your VS-211HDxl,

switch on the power on each device