Ritmix RLP-1044 [6/8] Connection

able to fire should be not less than 2.5 m.

2. Make sure that there is nothing to block the fan, which is built in the system, which will block the system cooling.

3. Please install the system that nothing would touch it or would affect the system during its working.

4. To ensure the safety, please ground the system.

Connection:

1. Connect the network cable DC5.0V/1.5A power and turn on the system by switching the button on/off to the position on.

2. Slot for cards is for TF card insert, after inserting music can start to play.

7. Press (8) Laser speed to choose the mode of the laser. Once you turn on the Laser, the default mode is SOUND CONTROL

MODE (means the light will change as per the music’s cadence); after that, the first time you press this button, the mode will

change to AUTO MODE (which means the light will move uniformly); if the second time you press this button, the mode will

change to STATIC (which means all the light will stop moving); the third time you press is button, it turn to the default mode

(SOUND CONTROL MODE) again.

8. Button (9) is the reception of the remote controller. When you use it, you need to align the remote control on (9). The Effective

control distance is 5 meters; The effective angle is ± 15 °, beyond the effect of this point will affect the remote control. When you

adjust the volume, please turn the product volume knob to maximum sound position, so that it can control the volume. See the

below PICTURE 2 to find the detail features of the remote controller, so as to the size of a normal remote volume, remote

control key features detailed drawings 2.

2. Laser generator-Wavelength：532 nm (Green), 660 nm (Red)

Panel: