Kramer PT-572HDCP+ [11/16] Connecting the transmitter receiver pair

PT-571HDCP/PT-572HDCP+ - Connecting the Transmitter Receiver Pair

6 Connecting the Transmitter Receiver Pair

Always switch off the power to each device before connecting it to your

Transmitter and Receiver pair. After connecting your Transmitter and

Receiver pair, connect the power and then switch on the power to

each device.

You can use the PT-571HDCP DVI Line Transmitter with the PT-572HDCP+ DVI

Line Receiver to configure a DVI transmitter/receiver system.

To connect the PT-571HDCP to the PT-572HDCP+, as illustrated in the example

in Figure 3, do the following:

1. Connect the CAT 5 OUT RJ-45 connector on the PT-571HDCP to the CAT 5

IN RJ-45 connector on the PT-572HDCP+ via a CAT 5 cable (see

Section 6.1).

2. On the PT-571HDCP, connect a DVI source (for example, a computer

graphics source) to the DVI IN connector.

3. On the PT-572HDCP+, connect the DVI OUT connector to a DVI acceptor

(for example, a display).

4. Connect the 12V DC power adapter to the power socket on the

PT-571HDCP and/or the PT-572HDCP+ and connect the adapter to the

mains electricity (not shown in Figure 3).