Kramer 3232 XY [19/30] Output and level setup

RS-485 PUSHBUTTON CONTROL PANELS

The two connectors on the back of the control panel are connected in parallel. This

allows the panels to be looped (“daisy chained”) together. If it is more convenient, you

can build a fan-out panel or box so that only one cable needs to run to each panel. In

either case, the total cable length cannot exceed 5,000 feet at 31,250 baud or 10,000 feet

at 9,600 baud.

If you make your own interconnect cables, Pin 2 is Ground. Pin 1 and 3 connect pin for

pin.

Warning!

Lights “scrolling” on a panel indicate that the panel is not communicating with the router. Check

the control panel cable and baud rate settings.

Output and Level Setup

The output(s) and levels the control panel will switch can be setup using the Sierra Video

TyLinx Pro software.

Follow the instructions in the TyLinx Pro manual to retrieve the router settings and

discover the control panels connected to the router.

If new control panels are added select “ReSync” on the device map screen of TyLinx Pro

to discover the new panels.