Kramer Yarden6-C [9/20] Installing the yarden 6 c closed back ceiling speakers

Yarden 6-C - Installing the Yarden 6-C Closed-back Ceiling Speakers

5 Installing the Yarden 6-C Closed-back

Ceiling Speakers

This section explains how to install the Yarden 6-C, that is:

 Choosing the best place to locate your speakers (see Section 5.1)

 Cutting the ceiling tile (see Section 5.2)

 Mounting the speakers (see Section 5.3)

 Setting up an array installation (see Section 5.4)

 Painting the speakers (see Section 5.5)

5.1 Choosing the Best Location

Ideally, locate the speakers above the main listening area. Before doing so, be

sure that:

 The desired location is free of obstructions, such as electrical piping, AC

ducts or water lines, and so on

 There is enough space behind the mounting surface for the speakers

 The rear side of the speaker is not blocked by wall studs or other objects

5.2 Cutting the Ceiling Tile

To cut the ceiling tile, do the following:

1. Remove the circle in the supplied template.

Keep this template for later use as a mask, as you may want to paint the speakers (see

Section 5.5)

2. Mark the opening in the correct location by tracing the hole in the template.

3. Cut out the hole according to the template or with a circular cutter set to the

appropriate cutout size.

Initially, you can cut a smaller area inside the marked hole just to be sure that the

space above the speakers is clear