DAB NOVA SALT W M-A Инструкция по эксплуатации онлайн [4/72] 143710

The power cord and floating switch must never be used to carry or move the pump.

Always use the pump’s handle.

When handling the pump, while it is connected to the electric power supply, you should avoid

all contact with water.

Never remove the plug by pulling on the power cord.

Before taking any action on the pump, always remove the plug from the power socket.

If the power supply cord has been damaged, it must be replaced by the manufacturer or his

authorized customer support service in order to avoid all risks.

Overload protection

The pump has a thermal overload safety device. In the event of any overheating of the motor, this device

automatically switches off the pump. The cooling time is roughly 15 to 20 minutes, then the pump

automatically comes on again. If the overload cutout is tripped, it is essential to identify and deal with the

cause of the overheating. See Troubleshooting.

2. USE

1. SAFETY MEASURES

Before starting the pump, read this instruction booklet carefully.

For safety reasons, the pump must not be used by anyone who has not read these instructions.

The appliance is not intendend for use by persons (including children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction con-

cerning use of the appliance by a person responsable for their safety. Children should be supervised to ensure

that they do not play with the appliance. (CEI EN 60335-1 : 08)

Submersible pumps for garden ponds to create water falls and fountains (NOVAPOND). The pumps are

designed to pump clean water or water containing solids with a diameter from 5 to 10 mm (depending on the

regulation of the  lter).

Ideal for continuous use

Designed for horizontal or vertical installation.

Multi-impeller submersible pumps with 2, 3 or 4 impellers (DIVER 6): ideal for rain water and mains irriga-

tion systems, for pumping water from tanks, ponds and wells and other applications that require high pressure.

The multistage submersible pumps must only be used in clean water. The pump should ideally be completely