Soundmax SM-CDM1050/G [22/62] Troubleshooting guide

Troubleshooting guide

General

No power or no

sound

Car's engine switch is not on. Turn your car's key to ACC or ON.

Cable is not correctly connected. Check connection.

Fuse is burnt. Replace fuse. Check volume or mute on / off.

If above solutions cannot help, press the RESET button.

Disc

Disc is inside but no

sound

Disc is upside down. Place disc in the correct direction, and the label side

up.

Disc is dirty or damaged. Clean disc or change another disc.

Disc sound skips,

tone quality is low

Disc is dirty or damaged.

Clean CD or change another CD.

Sound skips due to

vibration

Mounting angle is over 30º. Adjust mounting angle to less than 30º.

Instable mounting. Mount the unit securely with the mounting parts.

Radio

Much noise in

broadcasts

Station is too far, or signals are too weak.

Select other stations of higher signal level.

Preset station is

reset

Battery cable is not correctly connected.

Connect the battery cable to the terminal that is always live.

Error display

messages

NO FILE: Disc is not CD or contains no MP3 files.

ERR-7: Disc upside down.

ERR-10: Recovery error, check the disc.

ERR-11: MP3 error, check the disc.

ERR-3: ERR-4: Disc mechanism error.

Press

button to eject the disc. In case that the disc cannot be ejected

by pressing button, press the RESET switch and press the button

again. If still not ejecting consult your dealer.