ASRock 990FX EXTREME3 — настройка перемычек и сброс CMOS для системных параметров [29/68]

Превью страниц Страница 29 / 68

2.8 Jumpers Setup

The illustration shows how jumpers are

setup. When the jumper cap is placed on

pins, the jumper is “Short”. If no jumper cap

is placed on pins, the jumper is “Open”. The

illustration shows a 3-pin jumper whose

pin1 and pin2 are “Short” when jumper cap

is placed on these 2 pins.

Jumper Setting

Clear CMOS Jumper

(CLRCMOS1)

(see p.12, No. 22)

Note: CLRCMOS1 allows you to clear the data in CMOS. The data in CMOS in-

cludes system setup information such as system password, date, time, and

system setup parameters. To clear and reset the system parameters to de-

fault setup, please turn off the computer and unplug the power cord from the

power supply. After waiting for 15 seconds, use a jumper cap to short pin2

and pin3 on CLRCMOS1 for 5 seconds. However, please do not clear the

CMOS right after you update the BIOS. If you need to clear the CMOS when

you just nished updating the BIOS, you must boot up the system rst, and

then shut it down before you do the clear-CMOS action.

Clear CMOSDefault