Sven Power Pro+825 под. [13/16] Installation
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Sven Power Pro+825 под. [13/16] Installation

Sven Power Pro+825 под. [13/16] Installation
6. INSTALLATION
The following steps explain how to install the UPS to your PC.
Step 1. Assure AC power source output voltage is in the UPS. Require range which specify on the rear panel.
Step 2. Plug the UPS power cord into a wall outlet or other Power source.
Step 3. Plug the personal computer (PC) into the UPS output.
Step 4. Start the UPS by pressing the ON/OFF button. The AC power green LED indicator illuminates indicating that power is available
from the rear receptacles.
Step 5. Shutdown the UPS by pressing ON/OFF button.
Caution: Do not connect a laser printer to the outlets. These UPS outlets provide battery power and surge protection to the equipment when
utility voltage is outside acceptable limits.
6.1. REPLACING THE BATTERY
Note: Once the battery is disconnected, the loads are not protected from power outages.
Use a cross-type screwdriver to remove the two front panel screws and slide down the panel.
Gently Pull the battery out of the UPS.
Loosen the black wire from the negative (-) terminal and red wire from the positive (+) terminal.
Connect the battery leads to the new battery.
Note: Small sparks at the battery connectors are normal during connection.
Slide the battery into the UPS.
Close the front panel and fasten two screws.
Dispose of the old battery properly at an appropriate recycling facility.
13
Eng SVEN Power Pro+ 625/825

Содержание

Похожие устройства

pn SVEN Power Pro 625 825 6 INSTALLATION The following steps explain how to install the UPS to your PC Step 1 Assure AC power source output voltage is in the UPS Require range which specify on the rear panel Step 2 Plug the UPS power cord into a wall outlet or other Power source Step 3 Plug the personal computer PC into the UPS output Step 4 Start the UPS by pressing the ON OFF button The AC power green LED indicator illuminates indicating that power is available from the rear receptacles Step 5 Shutdown the UPS by pressing ON OFF button Caution Do not connect a laser printer to the outlets These UPS outlets provide battery power and surge protection to the equipment when utility voltage is outside acceptable limits 6 1 REPLACING THE BATTERY Note Once the battery is disconnected the loads are not protected from power outages Use a cross type screwdriver to remove the two front panel screws and slide down the panel Gently Pull the battery out of the UPS Loosen the black wire from the negative terminal and red wire from the positive terminal Connect the battery leads to the new battery Note Small sparks at the battery connectors are normal during connection Slide the battery into the UPS Close the front panel and fasten two screws Dispose of the old battery properly at an appropriate recycling facility 13

Скачать