Smeg SC45MF2 [14/27] Instructions for the user

Instructions for the User

Modifying the data set

Once automatic cooking has started, its duration can be changed.

When the and symbols are steady and cooking is in progress, or

the oven is in standby status waiting for cooking to start, press PT1 once.

The symbol starts flashing and PT1 can be turned to change the set

duration.

Press PT1 again; the symbol goes out, the symbol will start to

flash, and the cooking start time will be displayed on DSP1. The cooking

start time can be increased or decreased by turning PT1.

A few seconds after the last change, the e symbols will appear (in

steady mode) on DSP1 and automatic cooking will restart with the new

settings.

cooking has started, showing the set temperature.

7.6 Secondary menu

This appliance also has a concealed "secondary menu" allowing the user

to:

1 Activate or deactivate the child safety device ( );

2 Activate or deactivate the Show Room function (which disables all the

heating elements so that only the control panel works);

7.6.1 Child safety lock-out function

With the oven in OFF status (see point “7.2 Operating modes”) keep PT1

pressed until the message OFF SHO appears on DSP1. Now press PT1

until the message “OFF BLOC” appears on DPS1.

Turn PT1 to the right or left to activate (ON BLOC) or deactivate (OFF

BLOC) this function, which locks out all the functions and knobs after 3

minutes of operation without any command from the user (when this

system is active, the symbol appears on DPS2).

After setting the parameter required, press PT2 to return the oven to the

initial standby status.

To exit the lockout status temporarily to modify a cooking program or

select a different function, keep PT1 pressed until the symbol

disappears from DSP2. The required changes can now be made, and 3

minutes after the last setting is made the lockout will come into operation

again.

To deactivate the lockout permanently, access the secondary menu and

switch the function off as described in this section.

control panel will be on, except for DSP2 which will illuminate when

Once cooking has been programmed, before it starts all the lamps on the