Ariete 2712 [31/76] Cleaning

-29-

OPERATIONINSTARTMODE

Once the charge cycle has been completed, the appliance display will read “FULL” and it will be possible

to start the Robot and the cleaning cycle. To start the Robot, first check its status

Lights Robotstatus

“Pause” “CLEAN” button on and 2-3-5-6

icons flashing

In pause mode, waiting for com-

mands.

“Stand-by” “CLEAN” button and 2-3-5-6

icons off

ON (switch (Q) set to ON) but it

needs to be activated before it can

accept commands.

a) If the Robot is in “pause”(itdoesnotmoveandtheicons2-3-5-6areflashing), this means that it

is waiting for commands:

- to start the cleaning cycle, press the “CLEAN” button once or if necessary, press one of the buttons on

the control panel (B) on the appliance body:

- to set the Robot from “pause” to “stand-by” hold down the “CLEAN” button for 3 seconds or wait 20

seconds until the flashing icons switch off.

b) If the Robot is on “stand-by”(itdoesnotmoveandtheiconsand“CLEAN”buttonareoff), this

means it is on but that it needs to be activated before it can receive commands. To start the cleaning

cycle, press the “CLEAN” button twice:

- once to activate it and set it in “pause” mode: the icons 2-3-5-6 will start to flash;

- a second time to activate cleaning setting it to “cleaning”: the “CLEAN” button will switch on.

CLEANING

Once the cleaning cycle has been activated, to stop it, press the “CLEAN” button once< the icons will

begin to flash again.

- press it once to set the appliance to “pause”, waiting 20 seconds for it to enter “stand-by” mode automati-

cally;

- hold down for 3 seconds to set the Robot directly in “stand-by” mode.