Defender multicam wf-10hd [5/22] Www defender global com
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Defender multicam wf-10hd [5/22] Www defender global com

Defender multicam wf-10hd [5/22] Www defender global com
www.defender-global.com
5
4 EXTERIOR
Microphone
Strap Mounting
Micro USB Slot
Speaker
MicroSD Memory
Card Slot
RECORD Button
Status Indicator
Access Point Indicator
Cloud Mode Indicator
Photo Indicator
Video Indicator
Power Button
Mode Button
Magnetic
Mount
Support
Mount
Strap
Mounting
Mounting
Clip
5 CHARGING THE DEVICE
To charge the camera, connect it to the power supply or computer USB port. If the camera was off and the battery was
completely discharged, it will automatically switch to
“Charging”
mode; the camera will automatically shut down when
charging will be completed. If the camera did not switch to
“Charging”
mode automatically, press and hold button, until
the camera switches to this mode. While in
“Charging”
mode, the Indicator lights at the back panel will sequentially
ashred,whilethestatusindicatorwillcontinuouslyashredalongwiththeotherlights.
6 TURNING THE DEVICE ON
• If the camera is connected to power supply and the indicator lights are not on, then you need to switch the device
to
“Charging”
mode before turning it on (see
“CHARGING THE DEVICE”
section)
• If the camera is not connected to power supply or is currently in
“Charging”
mode, hold button, until the device
switches to
“Access Point”
mode. While in this mode the device will start a wireless access point that is built into
thecameraandtheaccesspointindicatorwillashgreen.Whentheaccesspointwillstartandbereadyfor
connection, the camera might not respond to button signals or respond with a delay.
Note: Holding the button for a prolonged period will force shut down the camera.
7 TURNING THE DEVICE OFF
• If the camera is connected to power supply, hold the button until the camera switches to
“Charging”
mode (see
“CHARGING THE DEVICE”
section)
• If the camera is not connected to power supply, hold the button until the indicator lights go out.
7.1 Automatic shut down
• If the camera is currently in
“Charging”
mode, then, after charging is complete, the device will automatically shut
down.
• If the camera is idle for 5 minutes and is using internal battery as main energy source in any mode, except Cloud
mode, it will shut down automatically.
Note: Video recording and broadcasting video stream never cause the device to become idle.
8 FORCED SHUT DOWN AND RESET
• If the camera does not respond or if the camera incorrectly responds to user actions, please, perform force shut
down. This may be done by holding (3 to 5 seconds) button, until the indicator lights go out.

Содержание

Похожие устройства

Скачать