![Gigabyte ga-b150m-d3h [25/41] Channel interleaving](/img/pdf.png)
Gigabyte ga-b150m-d3h [25/41] Channel interleaving
![Gigabyte ga-b150m-d3h ddr3 [25/41] Channel interleaving](/views2/1167902/page25/bg19.png)
& Memory Boot Mode
(Note)
Provides memory detection and training methods.
Auto Lets the BIOS automatically congure this setting. (Default)
Enable Fast Boot Skip memory detection and training in some specic criteria for faster memory
boot.
Disable Fast Boot Detect and train memory at every single boot.
& Memory Enhancement Settings
Provides several memory performance enhancement settings: Normal (basic performance), Relax OC,
Enhanced Stability, and Enhanced Performance. (Default: Normal)
& Memory Timing Mode
Manual and Advanced Manual allows the Memory Multiplier Tweaker, Channel Interleaving, Rank
Interleaving, and memory timing settings below to be congurable. Options are: Auto (default), Manual,
Advanced Manual.
& ProleDDRVoltage
Displays the memory voltage.
& Memory Multiplier Tweaker
Provides different levels of memory auto-tuning. (Default: Auto)
& Channel Interleaving
Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access
different channels of the memory to increase memory performance and stability. Auto lets the BIOS
automatically congure this setting. (Default: Auto)
& Rank Interleaving
Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access different
ranks of the memory to increase memory performance and stability. Auto lets the BIOS automatically
congure this setting. (Default: Auto)
` IMC Timing Settings
This sub-menu provides options for tuning memory compatibility and stability.
` Channel A/B Memory Sub Timings
This sub-menu provides memory timing settings for each channel of memory. This sub-menu provides memory
timing settings for each channel of memory. The respective timing setting screens are congurable only when
Memory Timing Mode is set to Manual or Advanced Manual. Note: Your system may become unstable or fail
to boot after you make changes on the memory timings. If this occurs, please reset the board to default values
by loading optimized defaults or clearing the CMOS values.
` Advanced Voltage Settings
` Advanced Power Settings
& CPU Vcore Loadline Calibration
Allows you to congure Load-Line Calibration for the CPU Vcore voltage. Selecting a higher level keeps
the CPU Vcore voltage more consistent with what is set in BIOS under heavy load. Auto lets the BIOS
automatically congure this setting and sets the voltage following Intel
®
's specications. (Default: Auto)
& VAXG Loadline Calibration
Allows you to congure Load-Line Calibration for the CPU VAXG voltage. Selecting a higher level keeps
the CPU VAXG voltage more consistent with what is set in BIOS under heavy load. Auto lets the BIOS
automatically congure this setting and sets the voltage following Intel
®
's specications. (Default: Auto)
(Note) This item is present only when you install a CPU and a memory module that support this feature.
- 25 -
Содержание
- Ga b150m d3h ga b150m d3h gsm ga b150m d3h ddr3 1
- Rev 1001 1
- User s manual 1
- Copyright 2
- Disclaimer 2
- Identifying your motherboard revision 2
- Chapter 1 hardware installation 3
- Chapter 2 bios setup 1 3
- Chapter 3 appendix 8 3
- Ga b150m d3h ga b150m d3h gsm motherboard layout ga b150m d3h ddr3 motherboard layout 3
- Table of contents 3
- Box contents 4
- Ga b150m d3h ga b150m d3h gsm 4
- Ga b150m d3h ga b150m d3h gsm motherboard layout 4
- Ga b150m d3h or ga b150m d3h gsm motherboard 4
- Motherboard driver disk 5 two sata cables 4
- User s manual 5 i o shield 4
- Box contents 5
- Ga b150m d3h ddr3 5
- Ga b150m d3h ddr3 motherboard 5 two sata cables 5
- Ga b150m d3h ddr3 motherboard layout 5
- Motherboard driver disk 5 i o shield 5
- User s manual 5
- 1 installation precautions 6
- Chapter 1 hardware installation 6
- 2 product specifications 7
- 2 productspecifications 7
- 3 installing the cpu 10
- 4 installing the memory 10
- Installing the cpu 10
- 5 installing an expansion card 11
- 6 back panel connectors 11
- D sub port 11
- Dvi d port 11
- Ps 2 keyboard mouse port 11
- Usb 2 1 port 11
- Center subwoofer speaker out orange 12
- Hdmi port 12
- Line in blue 12
- Line out green 12
- Mic in pink 12
- Rear speaker out black 12
- Rj 45 lan port 12
- Side speaker out gray 12
- Usb 3 2 port 12
- 7 internal connectors 13
- 2 atx_12v_2x4 atx 2x4 12v power connector and 2x12 main power connector 14
- The 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the computer will not start 14
- To meet expansion requirements it is recommended that a power supply that can withstand high power consumption be used 500w or greater if a power supply is used that does not provide the required power the result can lead to an unstable or unbootable system 14
- With the use of the power connector the power supply can supply enough stable power to all the components on the motherboard before connecting the power connector first make sure the power supply is turned off and all devices are properly installed the power connector possesses a foolproof design connect the power supply cable to the power connector in the correct orientation 14
- 12v speed control 15
- 4 cpu_fan sys_fan1 sys_fan2 sys_fan3 fan headers 15
- All fan headers on this motherboard are 4 pin most fan headers possess a foolproof insertion design when connecting a fan cable be sure to connect it in the correct orientation the black connector wire is the ground wire the speed control function requires the use of a fan with fan speed control design for optimum heat dissipation it is recommended that a system fan be installed inside the chassis 15
- Be sure to connect fan cables to the fan headers to prevent your cpu and system from overheating 15
- Each sata express connector supports a single sata express device 15
- Overheating may result in damage to the cpu or the system may hang 15
- Pin no definition 15
- Sata express sata express connector 15
- Sata3 0 1 2 3 4 5 sata 6gb s connectors 15
- Speed control 15
- The sata connectors conform to sata 6gb s standard and are compatible with sata 3gb s and sata 1 gb s standard each sata connector supports a single sata device 15
- These fan headers are not configuration jumper blocks do not place a jumper cap on the headers 15
- To enable hot plugging for the sata ports refer to chapter 2 bios setup peripherals sata configuration for more information 15
- Follow the steps below to correctly install an m ssd in the m connector step 1 use a screw driver to unfasten the screw and nut from the motherboard locate the proper mounting hole for the m ssd to be installed and then screw the nut first step 2 slide the m ssd into the connector at an angle step 3 press the m ssd down and then secure it with the screw 16
- M m socket 3 connector 16
- On the motherboard there are three length adjustment holes for the m ssd select the proper hole for the m ssd to be installed and refasten the screw and nut 16
- Sure to refer to the supported configurations in the tables below according to the operating mode of your sata controller 16
- The m connectors support m sata ssds and m pcie ssds 16
- When installing different types of m ssds including sata ssds pcie x4 ssds and pcie x2 ssds be 16
- Acz_det 9 line2_l 17
- Ci chassis intrusion header gray connects to the chassis intrusion switch sensor on the chassis that can detect if the chassis cover has been removed this function requires a chassis with a chassis intrusion switch sensor 17
- Connect the power switch reset switch speaker chassis intrusion switch sensor and system status indicator on the chassis to this header according to the pin assignments below note the positive and negative pins before connecting the cables 17
- Connects to the power status indicator on the chassis front panel the led is on when the system is operating the led is off when the system is in s3 s4 sleep state or powered off s5 17
- F_audio front panel audio header 17
- F_panel front panel header 17
- For hd front panel audio for ac 97 front panel audio 17
- Gnd 7 faudio_jd 17
- Gnd 7 nc 17
- Hd hard drive activity led blue connects to the hard drive activity led on the chassis front panel the led is on when the hard drive is reading or writing data 17
- Line out r 10 nc 17
- Line2_r 10 sense 17
- Mic 6 nc 17
- Mic power 8 no pin 17
- Mic2_l 6 sense 17
- Mic2_r 8 no pin 17
- Nc 9 line out l 17
- Nc orange no connection 17
- Of a single plug for information about connecting the front panel audio module that has different wire assignments please contact the chassis manufacturer 17
- Pin no definition pin no definition 17
- Pled pwr_led power led yellow purple 17
- Pw power switch red connects to the power switch on the chassis front panel you may configure the way to turn off your system using the power switch refer to chapter 2 bios setup power management for more information 17
- Res reset switch green connects to the reset switch on the chassis front panel press the reset switch to restart the computer if the computer freezes and fails to perform a normal restart 17
- S3 s4 s5 off 17
- Speak speaker orange connects to the speaker on the chassis front panel the system reports system startup status by issuing a beep code one single short beep will be heard if no problem is detected at system startup 17
- System status led 17
- The front panel audio header supports hd audio by default audio signals will be present on both of the front and back panel audio connections simultaneously some chassis provide a front panel audio module that has separated connectors on each wire instead 17
- The front panel audio header supports intel high definition audio hd and ac 97 audio you may connect your chassis front panel audio module to this header make sure the wire assignments of the module connector match the pin assignments of the motherboard header incorrect connection between the module connector and the motherboard header will make the device unable to work or even damage it 17
- The front panel design may differ by chassis a front panel module mainly consists of power switch reset switch power led hard drive activity led speaker and etc when connecting your chassis front panel module to this header make sure the wire assignments and the pin assignments are matched correctly 17
- Do not plug the ieee 1394 bracket 2x5 pin cable into the usb 2 1 header prior to installing the usb bracket be sure to turn off your computer and unplug the power cord 18
- F_usb1 f_usb2 usb 2 1 headers 18
- F_usb30 usb 3 2 header 18
- From the power outlet to prevent damage to the usb bracket 18
- Spdif_o s pdif out header 18
- The header conforms to usb 3 2 specification and each header can provide two usb ports for purchasing the optional 3 front panel that provides two usb 3 2 ports please contact the local dealer 18
- The headers conform to usb 2 1 specification each usb header can provide two usb ports via an optional usb bracket for purchasing the optional usb bracket please contact the local dealer 18
- This header supports digital s pdif out and connects a s pdif digital audio cable provided by expansion cards for digital audio output from your motherboard to certain expansion cards like graphics cards and sound cards for example some graphics cards may require you to use a s pdif digital audio cable for digital audio output from your motherboard to your graphics card if you wish to connect an hdmi display to the graphics card and have digital audio output from the hdmi display at the same time for information about connecting the s pdif digital audio cable carefully read the manual for your expansion card 18
- Com serial port header 19
- Lpt parallel port header 19
- The com header can provide one serial port via an optional com port cable for purchasing the optional com port cable please contact the local dealer 19
- The lpt header can provide one parallel port via an optional lpt port cable for purchasing the optional lpt port cable please contact the local dealer 19
- Tpm trusted platform module header 19
- You may connect a tpm trusted platform module to this header 19
- Add in card 20
- Add in card connector 20
- After system restart go to bios setup to load factory defaults select load optimized defaults or 20
- Always turn off your computer and unplug the power cord before replacing the battery replace the battery with an equivalent one danger of explosion if the battery is replaced with 20
- Always turn off your computer and unplug the power cord from the power outlet before clearing 20
- An incorrect model 20
- Bat battery 20
- Clr_cmos clear cmos jumper 20
- Contact the place of purchase or local dealer if you are not able to replace the battery by yourself 20
- Manually configure the bios settings refer to chapter 2 bios setup for bios configurations 20
- N_ s4_s5 20
- N_ slp_s3 20
- Object like a screwdriver to touch the positive and negative terminals of the battery holder making them short for 5 seconds 20
- Open normal 20
- Or uncertain about the battery model 20
- Pin no definition 20
- Replace the battery 4 plug in the power cord and restart your computer 20
- Short clear cmos values 20
- Supports a thunderbol 20
- Thb_c thunderbol 20
- The battery provides power to keep the values such as bios configurations date and time information in the cmos when the computer is turned off replace the battery when the battery voltage drops to a low level or the cmos values may not be accurate or may be lost 20
- The battery the positive side should face up 20
- The cmos values 20
- This connector is for a gigabyte thunderbol 20
- Use this jumper to clear the bios configuration and reset the cmos values to factory defaults to clear the cmos values use a metal object like a screwdriver to touch the two pins for a few seconds 20
- Used batteries must be handled in accordance with local environmental regulations 20
- When installing the battery note the orientation of the positive side and the negative side of 20
- You may clear the cmos values by removing the battery 1 turn off your computer and unplug the power cord 2 gently remove the battery from the battery holder and wait for one minute or use a metal 20
- 1 startup screen 21
- Chapter 2 bios setup 21
- 2 m i t 22
- C3 state support 23
- C6 c7 state support 23
- Core current limit amps 23
- Cpu enhanced halt c1e 23
- Cpu flex ratio override 23
- Cpu flex ratio settings 23
- Hyper threading technology 23
- Intel r turbo boost technology 23
- No of cpu cores enabled 23
- Power limit tdp watts power limit time 23
- Turbo rati 23
- Uncore frequency 23
- Adjacent cache line preferch 24
- Advanced memory settings 24
- C8 state support 24
- Cpu eist function 24
- Cpu thermal monitor 24
- Hardware prefetcher 24
- Memory frequency mhz 24
- Package c state limit 24
- System memory multiplier 24
- System memory multiplier memory frequency mhz 24
- Voltage optimization 24
- Advanced power settings 25
- Advanced voltage settings 25
- Channel a b memory sub timings 25
- Channel interleaving 25
- Cpu vcore loadline calibration 25
- Imc timing settings 25
- Memory boot mode 25
- Memory enhancement settings 25
- Memory multiplier tweaker 25
- Memory timing mode 25
- Profileddrvoltage 25
- Rank interleaving 25
- Vaxg loadline calibration 25
- Case open 26
- Chipset voltage control 26
- Cpu core voltage control 26
- Cpu fan speed control cpu_fan connector 26
- Cpu system fan fail warning 26
- Cpu system fan speed 26
- Cpu system temperature 26
- Cpu system temperature warning 26
- Cpu vcore cpu vccsa dram channel a b voltage 3 v 5v 12v cpu vaxg 26
- Dram voltage control 26
- Fan speed percentage 26
- Internal vr control 26
- Pc health status 26
- Reset case open status 26
- 1st system fan speed control sys_fan1 connector 27
- 2nd system fan speed control sys_fan2 connector 27
- 3dmark01 enhancement 27
- 3rd system fan speed control sys_fan3 connector 27
- Fan speed percentage 27
- Max link speed 27
- Miscellaneous settings 27
- 3 system information 28
- Access level 28
- System date 28
- System language 28
- System time 28
- 4 bios features 29
- Boot option priorities 29
- Bootup numlock state 29
- Full screen logo show 29
- Hard drive cd dvd rom drive floppy drive network device bbs priorities 29
- Security option 29
- Csm support 30
- Fast boot 30
- Lan pxe boot option rom 30
- Network stack driver support 30
- Next boot after ac power loss 30
- Ps2 devices support 30
- Sata support 30
- Usb support 30
- Vga support 30
- Windows 8 10 features 30
- Administrator password 31
- Ipv4 pxe support 31
- Ipv6 pxe support 31
- Network stack 31
- Other pci device rom priority 31
- Storage boot option control 31
- User password 31
- 5 peripherals 32
- Audio led 32
- Initial display output 32
- Intel platform trust technology ptt 32
- Legacy usb support 32
- Offboardsatacontrollerconfiguration 32
- Trusted computing 2 32
- Usb mass storage driver support 32
- Usb storage devices 32
- Xhci hand off 32
- 6 chipset 34
- Audio controller 34
- Audio dsp 34
- Dvmt pre allocated 34
- Dvmt total gfx mem 34
- High precision timer 34
- Internal graphics 34
- Pch lan controller 34
- Wake on lan 34
- 7 power management 35
- Ac back 35
- Power on by keyboard 35
- Power on by mouse 35
- Power on password 35
- Dmi link aspm control 36
- Pch aspm 36
- Peg aspm 36
- Platform power management 36
- Power loading 36
- Rc6 render standby 36
- Resume by alarm 36
- Soft off by pwr bttn 36
- 8 save exit 37
- Boot override 37
- Exit without saving 37
- Load optimized defaults 37
- Loadprofiles 37
- Save exit setup 37
- Saveprofiles 37
- Chapter 3 appendix 38
- Drivers installation 38
- Our commitment to preserving the environment 39
- Regulatory notices 39
- Regulatory statements 39
- Restriction of hazardous substances rohs directive statement 39
- Waste electrical electronic equipment weee directive statement 39
- Weee symbol statement 39
- Canada industry canada ic notices canada avis d industry canada ic 40
- Fcc notice u s a only 40
- Contact us 41
- Gigabyte esupport 41
- To submit a technical or non technical sales marketing question please link to http esupport gigabyte com 41
Похожие устройства
- Gigabyte ga-b150-hd3 Инструкция по эксплуатации
- Gigabyte ga-b150-hd3 ddr3 Инструкция по эксплуатации
- Gigabyte ga-h170m-d3h Инструкция по эксплуатации
- Gigabyte ga-z170xp-sli Инструкция по эксплуатации
- Gigabyte ga-n3050n-d2p Инструкция по эксплуатации
- Gigabyte ga-n3050n-d3h Инструкция по эксплуатации
- Gigabyte gsmart classic grey Инструкция по эксплуатации
- Gigabyte ga-n3150m-d3p Инструкция по эксплуатации
- Gigabyte ga-n3150n-d2h Инструкция по эксплуатации
- Gigabyte ga-n3150n-d3v Инструкция по эксплуатации
- Gigabyte ga-z170-hd3p Инструкция по эксплуатации
- Gigabyte ga-b150m-d2v Инструкция по эксплуатации
- Gigabyte ga-h110m-s2hp Инструкция по эксплуатации
- Gigabyte ga-h110m-s2 Инструкция по эксплуатации
- Gigabyte brix gb-bace-3000 Инструкция по эксплуатации
- Gigabyte ga-h110m-s2h Инструкция по эксплуатации
- Gigabyte ga-z170-gaming k3. v1. Инструкция по эксплуатации
- Gigabyte ga-x99-gaming 5p Инструкция по эксплуатации
- Gigabyte ga-x99p-sli Инструкция по эксплуатации
- Gigabyte ga-h170-gaming 3 Инструкция по эксплуатации
Скачать
Случайные обсуждения