![Gigabyte ga-x150m-pro ecc [10/44] 5 installing an expansion card](/img/pdf.png)
Gigabyte ga-x150m-pro ecc [10/44] 5 installing an expansion card
![Gigabyte ga-x150m-pro ecc [10/44] 5 installing an expansion card](/views2/1167939/page10/bga.png)
1-5 Installing an Expansion Card
Read the following guidelines before you begin to install an expansion card:
• Make sure the motherboard supports the expansion card. Carefully read the manual that came
with your expansion card.
• Always turn off the computer and unplug the power cord from the power outlet before installing an
expansion card to prevent hardware damage.
Due to CPU limitations, read the following guidelines before installing the memory in Dual Channel mode.
1. Dual Channel mode cannot be enabled if only one memory module is installed.
2. When enabling Dual Channel mode with two or four memory modules, it is recommended that memory
of the same capacity, brand, speed, and chips be used and installed in the same colored sockets.
The four DDR4 memory sockets are divided into two channels and each channel has two memory sockets as
following:
Channel A: DDR4_2, DDR4_4
Channel B: DDR4_1, DDR4_3
DualChannelMemoryCongurationsTable
DDR4_4 DDR4_2 DDR4_3 DDR4_1
2 Modules
- - DS/SS - - DS/SS
DS/SS - - DS/SS - -
4 Modules DS/SS DS/SS DS/SS DS/SS
(SS=Single-Sided, DS=Double-Sided, "- -"=No Memory)
1-6 Back Panel Connectors
PS/2 Keyboard and PS/2 Mouse Port
Use the upper port (green) to connect a PS/2 mouse and the lower port (purple) to connect a PS/2 keyboard.
USB 3.0/2.0 Port
TheUSB3.0portsupportstheUSB3.0specicationandiscompatibletotheUSB2.0/1.1specication.
Use this port for USB devices.
RJ-45 LAN Port
The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following
describes the states of the LAN port LEDs.
Activity LED
Connection/
Speed LED
LAN Port
Activity LED:
Connection/Speed LED:
State Description
Orange 1 Gbps data rate
Green 100 Mbps data rate
Off 10 Mbps data rate
State Description
Blinking Data transmission or receiving is occurring
On No data transmission or receiving is occurring
USB 2.0/1.1 Port
TheUSBportsupportstheUSB2.0/1.1specication.UsethisportforUSBdevices.
- 10 -
Содержание
- Ga x150m pro ecc 1
- Rev 1001 12me x15mpre 1001r 1
- User s manual 1
- Copyright 2
- Disclaimer 2
- Identifying your motherboard revision 2
- Chapter 1 hardware installation 3
- Chapter 2 bios setup 0 3
- Chapter 3 appendix 7 3
- Ga x150m pro ecc motherboard layout 3
- Table of contents 3
- Box contents 4
- Ga x150m pro ecc 4
- Ga x150m pro ecc motherboard 4
- Ga x150m pro ecc motherboard layout 4
- Motherboard driver disk 5 two sata cables 4
- User s manual 5 i o shield 4
- 1 installation precautions 5
- Chapter 1 hardware installation 5
- 2 product specifications 6
- 2 productspecifications 6
- 3 installing the cpu 9
- 4 installing the memory 9
- Installing the cpu 9
- 5 installing an expansion card 10
- 6 back panel connectors 10
- Always turn off the computer and unplug the power cord from the power outlet before installing an 10
- Channel a ddr4_2 ddr4_4 10
- Channel b ddr4_1 ddr4_3 10
- Dual channel mode cannot be enabled if only one memory module is installed 10
- Dualchannelmemoryconfigurationstable 10
- Due to cpu limitations read the following guidelines before installing the memory in dual channel mode 10
- Expansion card to prevent hardware damage 10
- Ps 2 keyboard and ps 2 mouse port 10
- Read the following guidelines before you begin to install an expansion card make sure the motherboard supports the expansion card carefully read the manual that came 10
- Rj 45 lan port 10
- The four ddr4 memory sockets are divided into two channels and each channel has two memory sockets as following 10
- The gigabit ethernet lan port provides internet connection at up to 1 gbps data rate the following describes the states of the lan port leds 10
- Theusb3 portsupportstheusb3 specificationandiscompatibletotheusb2 1 specification use this port for usb devices 10
- Theusbportsupportstheusb2 1 specification usethisportforusbdevices 10
- Usb 2 1 port 10
- Usb 3 2 port 10
- Use the upper port green to connect a ps 2 mouse and the lower port purple to connect a ps 2 keyboard 10
- When enabling dual channel mode with two or four memory modules it is recommended that memory of the same capacity brand speed and chips be used and installed in the same colored sockets 10
- With your expansion card 10
- Center subwoofer speaker out orange 11
- Line in blue 11
- Line out green 11
- Mic in pink 11
- Rear speaker out black 11
- Side speaker out gray 11
- 7 internal connectors 12
- 2 atx_12v_2x4 atx 2x4 12v power connector and 2x12 main power connector 13
- The 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the 12v power connector mainly supplies power to the cpu if the 12v power connector is not connected the computer will not start 13
- To meet expansion requirements it is recommended that a power supply that can withstand high power consumption be used 500w or greater if a power supply is used that does not provide the required power the result can lead to an unstable or unbootable system 13
- With the use of the power connector the power supply can supply enough stable power to all the components onthemotherboard beforeconnectingthepowerconnector firstmakesurethepowersupplyisturned off and all devices are properly installed the power connector possesses a foolproof design connect the power supply cable to the power connector in the correct orientation 13
- 12v speed control 14
- 4 cpu_fan sys_fan1 sys_fan2 sys_fan3 fan headers 14
- All fan headers on this motherboard are 4 pin most fan headers possess a foolproof insertion design when connecting a fan cable be sure to connect it in the correct orientation the black connector wire is the ground wire the speed control function requires the use of a fan with fan speed control design for optimum heat dissipation it is recommended that a system fan be installed inside the chassis 14
- Be sure to connect fan cables to the fan headers to prevent your cpu and system from overheating 14
- Chipset supports raid 0 raid 1 raid5 andraid10 refertochapter3 configuringaraidset forinstructionsonconfiguringaraid array 14
- Each sata express connector supports a single sata express device the sata express connector is not compatible with regular sata devices 14
- Overheating may result in damage to the cpu or the system may hang 14
- Pin no definition 14
- Sata express sata express connector 14
- Sata3 0 1 2 3 4 5 sata 6gb s connectors 14
- Speed control 14
- The sata connectors conform to sata 6gb s standard and are compatible with sata 3gb s and sata 1 gb s standard each sata connector supports a single sata device the inte 14
- Thesefanheadersarenotconfigurationjumperblocks donotplaceajumpercapontheheaders 14
- To enable hot plugging for the sata ports refer to chapter 2 bios setup peripherals sata configuration formoreinformation 14
- Chipset please note that an m pcie ssd cannot be used to create a raid set with sata drive s refertochapter3 configuringaraidset forinstructionsonconfiguringaraidarray 15
- Express connector can be used is dependent on the type of m ssd being installed please refer to the table below 15
- Follow the steps below to correctly install an m ssd in the m connector step 1 use a screw driver to unfasten the screw and nut from the motherboard locate the proper mounting hole forthem ssdtobeinstalledandthenscrewthenutfirst step 2 slide the m ssd into the connector at an angle step 3 press the m ssd down and then secure it with the screw 15
- M m socket 3 connector 15
- Note the m pcie x4 ssd will run at x2 speed if a pci slot is populated 15
- Select the proper hole for the m ssd to be installed and refasten the screw and nut 15
- The pci slots share bandwidth with the m and sata express connectors whether the sata 15
- Them connectorsupportsm satassdsandm pciessds itcansupportsataraidconfiguration through the inte 15
- Acz_det 9 line2_l 16
- Ci chassis intrusion header gray connects to the chassis intrusion switch sensor on the chassis that can detect if the chassis cover has been removed this function requires a chassis with a chassis intrusion switch sensor 16
- Connect the power switch reset switch speaker chassis intrusion switch sensor and system status indicator on the chassis to this header according to the pin assignments below note the positive and negative pins before connecting the cables 16
- Connects to the power status indicator on the chassis front panel the led is on when the system is operating the led is off when the system is in s3 s4 sleep state or powered off s5 16
- F_audio front panel audio header 16
- F_panel front panel header 16
- For hd front panel audio for ac 97 front panel audio 16
- Gnd 7 faudio_jd 16
- Gnd 7 nc 16
- Hd hard drive activity led blue connects to the hard drive activity led on the chassis front panel the led is on when the hard drive is reading or writing data 16
- Line out r 10 nc 16
- Line2_r 10 sense 16
- Mic 6 nc 16
- Mic power 8 no pin 16
- Mic2_l 6 sense 16
- Mic2_r 8 no pin 16
- Nc 9 line out l 16
- Nc orange no connection 16
- Of a single plug for information about connecting the front panel audio module that has different wire assignments please contact the chassis manufacturer 16
- Pin no definition pin no definition 16
- Pled pwr_led power led yellow purple 16
- Pw power switch red connects to the power switch on the chassis front panel you may configurethewaytoturnoffyoursystemusingthepowerswitch referto chapter 2 bios setup power management for more information 16
- Res reset switch green connects to the reset switch on the chassis front panel press the reset switch to restart the computer if the computer freezes and fails to perform a normal restart 16
- S3 s4 s5 off 16
- Speak speaker orange connects to the speaker on the chassis front panel the system reports system startup status by issuing a beep code one single short beep will be heard if no problem is detected at system startup 16
- System status led 16
- The front panel audio header supports hd audio by default audio signals will be present on both of the front and back panel audio connections simultaneously some chassis provide a front panel audio module that has separated connectors on each wire instead 16
- The front panel design may differ by chassis a front panel module mainly consists of power switch reset switch power led hard drive activity led speaker and etc when connecting your chassis front panel module to this header make sure the wire assignments and the pin assignments are matched correctly 16
- Thefrontpanelaudioheadersupportsintelhighdefinitionaudio hd andac 97audio youmayconnect your chassis front panel audio module to this header make sure the wire assignments of the module connector match the pin assignments of the motherboard header incorrect connection between the module connector and the motherboard header will make the device unable to work or even damage it 16
- Do not plug the ieee 1394 bracket 2x5 pin cable into the usb 2 1 header prior to installing the usb bracket be sure to turn off your computer and unplug the power cord 17
- F_usb1 f_usb2 usb 2 1 headers 17
- F_usb30 usb 3 2 header 17
- From the power outlet to prevent damage to the usb bracket 17
- Spdif_o s pdif out header 17
- Theheaderconformstousb3 2 specificationandeachheadercanprovidetwousbports for purchasing the optional 3 front panel that provides two usb 3 2 ports please contact the local dealer 17
- Theheadersconformtousb2 1 specification eachusbheadercanprovidetwousbportsviaan optional usb bracket for purchasing the optional usb bracket please contact the local dealer 17
- This header supports digital s pdif out and connects a s pdif digital audio cable provided by expansion cards for digital audio output from your motherboard to certain expansion cards like graphics cards and sound cards for example some graphics cards may require you to use a s pdif digital audio cable for digital audio output from your motherboard to your graphics card if you wish to connect an hdmi display to the graphics card and have digital audio output from the hdmi display at the same time for information about connecting the s pdif digital audio cable carefully read the manual for your expansion card 17
- Com serial port header 18
- Lpt parallel port header 18
- The com header can provide one serial port via an optional com port cable for purchasing the optional com port cable please contact the local dealer 18
- The lpt header can provide one parallel port via an optional lpt port cable for purchasing the optional lpt port cable please contact the local dealer 18
- Tpm trusted platform module header 18
- You may connect a tpm trusted platform module to this header 18
- Add in card 19
- Add in card connector 19
- After system restart go to bios setup to load factory defaults select load optimized defaults or 19
- Always turn off your computer and unplug the power cord before replacing the battery replace the battery with an equivalent one danger of explosion if the battery is replaced with 19
- Always turn off your computer and unplug the power cord from the power outlet before clearing 19
- An incorrect model 19
- Bat battery 19
- Clr_cmos clear cmos jumper 19
- Contact the place of purchase or local dealer if you are not able to replace the battery by yourself 19
- Manuallyconfigurethebiossettings refertochapter2 biossetup forbiosconfigurations 19
- N_ s4_s5 19
- N_ slp_s3 19
- Object like a screwdriver to touch the positive and negative terminals of the battery holder making them short for 5 seconds 19
- Open normal 19
- Or uncertain about the battery model 19
- Pin no definition 19
- Replace the battery 4 plug in the power cord and restart your computer 19
- Short clear cmos values 19
- Supports a thunderbol 19
- Thb_c thunderbol 19
- The battery the positive side should face up 19
- The cmos values 19
- Thebatteryprovidespowertokeepthevalues suchasbiosconfigurations date andtimeinformation in the cmos when the computer is turned off replace the battery when the battery voltage drops to a low level or the cmos values may not be accurate or may be lost 19
- This connector is for a gigabyte thunderbol 19
- Used batteries must be handled in accordance with local environmental regulations 19
- Usethisjumpertoclearthebiosconfigurationandresetthecmosvaluestofactorydefaults toclear the cmos values use a metal object like a screwdriver to touch the two pins for a few seconds 19
- When installing the battery note the orientation of the positive side and the negative side of 19
- You may clear the cmos values by removing the battery 1 turn off your computer and unplug the power cord 2 gently remove the battery from the battery holder and wait for one minute or use a metal 19
- 1 startup screen 20
- Chapter 2 bios setup 20
- 2 m i t 21
- Advanced cpu core settings 21
- Advanced frequency settings 21
- Cpu clock ratio 21
- Cpu clock ratio cpu frequency 21
- Cpu flex ratio override 21
- Cpu frequency 21
- M i t current status 21
- Uncore frequency 21
- Uncore ratio 21
- C3 state support 22
- C6 c7 state support 22
- C8 state support 22
- Core current limit amps 22
- Cpu enhanced halt c1e 22
- Cpu flex ratio settings 22
- Hyper threading technology 22
- Intel r turbo boost technology 22
- No of cpu cores enabled 22
- Power limit tdp watts power limit time 22
- Turbo rati 22
- Adjacent cache line preferch 23
- Advanced memory settings 23
- Cpu eist function 23
- Cpu thermal monitor 23
- Hardware prefetcher 23
- Memory boot mode 23
- Memory frequency mhz 23
- Package c state limit 23
- Residency state regulation rsr 23
- System memory multiplier 23
- System memory multiplier memory frequency mhz 23
- Voltage optimization 23
- Advanced power settings 24
- Advanced voltage settings 24
- Channel a b memory sub timings 24
- Channel interleaving 24
- Chipset voltage control 24
- Cpu core voltage control 24
- Cpu vcore loadline calibration 24
- Dram voltage control 24
- Imc timing settings 24
- Memory enhancement settings 24
- Memory multiplier tweaker 24
- Memory timing mode 24
- Profileddrvoltage 24
- Rank interleaving 24
- 1st system fan speed control sys_fan1 connector 25
- Case open 25
- Cpu fan speed control cpu_fan connector 25
- Cpu system fan fail warning 25
- Cpu system fan speed 25
- Cpu system temperature 25
- Cpu system temperature warning 25
- Cpu vcore cpu vccsa dram channel a b voltage 3 v 5v 12v cpu vaxg 25
- Fan speed percentage 25
- Internal vr control 25
- Pc health status 25
- Reset case open status 25
- 2nd system fan speed control sys_fan2 connector 26
- 3dmark01 enhancement 26
- 3rd system fan speed control sys_fan3 connector 26
- Fan speed percentage 26
- Max link speed 26
- Miscellaneous settings 26
- 3 system information 27
- Access level 27
- System date 27
- System language 27
- System time 27
- 4 bios features 28
- Boot option priorities 28
- Bootup numlock state 28
- Full screen logo show 28
- Hard drive cd dvd rom drive floppy drive network device bbs priorities 28
- Security option 28
- Csm support 29
- Fast boot 29
- Lan pxe boot option rom 29
- Network stack driver support 29
- Next boot after ac power loss 29
- Ps2 devices support 29
- Sata support 29
- Usb support 29
- Vga support 29
- Windows 8 10 features 29
- Administrator password 30
- Ipv4 pxe support 30
- Ipv6 pxe support 30
- Mouse speed 30
- Network stack 30
- Other pci device rom priority 30
- Storage boot option control 30
- User password 30
- 5 peripherals 31
- Audio led 31
- Legacy usb support 31
- Offboardsatacontrollerconfiguration 31
- Pending operation 31
- Port 60 64 emulation 31
- Security device support 31
- Trusted computing 2 31
- Usb mass storage driver support 31
- Usb storage devices 31
- Xhci hand off 31
- Aggressive lpm support 32
- Device select 32
- External sata 32
- External tpm2 32
- Hot plug 32
- Intel r bios guard technology 32
- Intel r ethernet connection 32
- Nvmeconfiguration 32
- Parallel port 32
- Port 0 1 2 3 4 5 32
- Sata controller s 32
- Sata mode selection 32
- Sataconfiguration 32
- Serial port 1 32
- Superioconfiguration 32
- Tpm 20 interfacetype 32
- 6 chipset 33
- Audio controller 33
- Audio dsp 33
- High precision timer 33
- Ioapic 24 119 entries 33
- Pch lan controller 33
- Wake on lan 33
- 7 power management 34
- Ac back 34
- Power on by keyboard 34
- Power on by mouse 34
- Power on password 34
- Dmi link aspm control 35
- Pch aspm 35
- Peg aspm 35
- Platform power management 35
- Power loading 35
- Resume by alarm 35
- Soft off by pwr bttn 35
- 8 save exit 36
- Boot override 36
- Exit without saving 36
- Load optimized defaults 36
- Loadprofiles 36
- Save exit setup 36
- Saveprofiles 36
- 1 configuring a raid set 37
- 1 configuringaraidset 37
- A installing sata hard drive s in your computer 37
- B configuringsatacontrollermodeinbiossetup 37
- Before you begin please prepare the following items 37
- C 1 uefiraidconfiguration 37
- Chapter 3 appendix 37
- Configuringtheonboardsatacontroller 37
- Raid levels 37
- C 2 configuringlegacyraidrom 38
- Installing the operating system 38
- Installing the sata raid ahci driver and operating system 38
- 2 drivers installation 39
- Our commitment to preserving the environment 40
- Regulatory notices 40
- Regulatory statements 40
- Restriction of hazardous substances rohs directive statement 40
- Waste electrical electronic equipment weee directive statement 40
- Weee symbol statement 40
- Canada industry canada ic notices canada avis d industry canada ic 41
- Fcc notice u s a only 41
- Contact us 44
- Gigabyte esupport 44
- To submit a technical or non technical sales marketing question please link to http esupport gigabyte com 44
Похожие устройства
- Gigabyte ga-x150-plus ws Инструкция по эксплуатации
- Gigabyte ga-x150m-plus ws Инструкция по эксплуатации
- Gigabyte ga-b150m-hd3 Инструкция по эксплуатации
- Gigabyte ga-b150m-d3v Инструкция по эксплуатации
- Gigabyte ga-h110-d3 Инструкция по эксплуатации
- Gigabyte ga-h110m-s2pv Инструкция по эксплуатации
- Gigabyte ga-h110m-s2h ddr3 Инструкция по эксплуатации
- Gigabyte ga-h110m-ds2 Инструкция по эксплуатации
- Gigabyte ga-h110m-h Инструкция по эксплуатации
- Gigabyte ga-h110m-h Инструкция по эксплуатации
- Gigabyte ga-h110m-s2v ddr3 Инструкция по эксплуатации
- Gigabyte ga-h110m-h ddr3 Инструкция по эксплуатации
- Gigabyte ga-h110m-s2v Инструкция по эксплуатации
- Gigabyte ga-f2a88x-d3hp Инструкция по эксплуатации
- Gigabyte ga-f2a88xm-d3hp Инструкция по эксплуатации
- Gigabyte ga-f2a88xm-hd3p Инструкция по эксплуатации
- Gigabyte ga-f2a88xm-ds2p Инструкция по эксплуатации
- Gigabyte ga-f2a68hm-d3h Инструкция по эксплуатации
- Gigabyte brix gb-bsi7t-6500 Инструкция по эксплуатации
- Gigabyte brix gb-bsi5t-6200 Инструкция по эксплуатации